Robotics & Automation News

Where Innovation Meets Imagination

gas

FPT Industrial uses Sherpa autonomous mobile robots to increase production

by

Powerful performance, advanced technology, real sustainability. And now, also a landmark target achieved. FPT Industrial announces the production of the 10,000th Cursor 13 NG engine, rolling off the line of its plant in Bourbon-Lancy (France) on March 9th.

First unveiled in Turin (Italy) in October 2017 during the FPT Tech Day, the Cursor 13 Natural Gas engine, in little more than three years, has won the hearts and the profit-oriented minds of even the most natural gas-skeptical transport professionals, reaching an ever increasing popularity and record sales.

Currently the most powerful 100 percent Natural Gas engine available in the on-road segment and the first purely NG engine specially developed for long-haul missions, the Cursor 13 NG is produced at Bourbon-Lancy, the FPT Industrial plant located in the Burgundy region of France. [Read more…] about FPT Industrial uses Sherpa autonomous mobile robots to increase production

Gas Turbine and Energy Production: How Sensing Technology Works

by


Why Natural Gas Is A Key Contributor to the Energy Industry


Natural gas has a number of benefits over alternative sources of power. Nuclear power is carbon-free, but it is incredibly expensive due to engineering controls in place to ensure its safety. The United States is a domestic producer of natural gas, whereas oil often comes from countries that hate us.

That natural gas is relatively cheap is a side benefit. Natural gas use produces less greenhouse gas than coal or oil, explaining why a number of oil and coal plants have been converted to natural gas. While wind and solar power is being built at a rapid pace, it is unreliable due to weather.

Furthermore, wind and solar tend to be at their low point when power demand is highest, whether it is a freezing winter night or late on a summer evening. The solution is building more natural gas power plants to meet consumer needs, even when it is a backup for renewable energy. [Read more…] about Gas Turbine and Energy Production: How Sensing Technology Works

Explosion-proof ANYmal canine robots inspecting Petronas’ offshore platform

by

Petronas, a global energy and solutions company from Malaysia, is testing the ANYmal four-legged dog-like robot from ANYbotics for autonomous robotic inspection on its oil and gas platforms. (See video below.)

They recently conducted a successful multi-week installation with the robot ANYmal C on one of their offshore facilities. For commercial use in 2022, ANYbotics and Petronas are co-developing a specialized version of ANYmal for potentially explosive environments.

Petronas relies on robotics to enable unmanned industrial inspections in its production operations. Its long-term partnership with ANYbotics focuses on bringing robotic routine inspection to offshore and onshore facilities targeting the commercial use of the ANYmal canine robot in potentially explosive environments by 2022. [Read more…] about Explosion-proof ANYmal canine robots inspecting Petronas’ offshore platform

Robotic MIG vs TIG Welding: Picking the Right Option

by

Being able to pinpoint the right type of welding for your specific robotic welding application is a crucial decision.

The truth is, not all robotic welding types are equal even though they produce outcomes that are similar.

Two types that are most common of this type of welding are metal inert gas (MIG) and tungsten inert gas (TIG). [Read more…] about Robotic MIG vs TIG Welding: Picking the Right Option

ExRobotics and Yokogawa to develop robotics for inspection of hazardous environments

by

ExRobotics and Yokogawa Electric have signed a licensing agreement that will enable Yokogawa to sell and deploy ExRobotics’ inspection robot hardware and software platforms worldwide.

ExRobotics is a Netherlands-based developer of robotics technology for hazardous environments, and Yokogawa Electric Corporation is a global provider of industrial automation, control, and measurement technology.

ExRobotics was established in 2017 to commercialise robotics technology for use in the potentially explosive atmospheres found at oil and gas production and processing facilities, which are often in remote locations with harsh environments. [Read more…] about ExRobotics and Yokogawa to develop robotics for inspection of hazardous environments

Kia car to feature ‘first’ CVVD engine technology

by

Hyundai Motor Group, Kia Motors‘ parent company, has developed the world’s first Continuously Variable Valve Duration (CVVD) technology to feature in future Kia vehicles.

The innovation was revealed at Hyundai Motorstudio Goyang alongside the Smartstream G1.6 T-GDi, the first engine to feature the technology.

CVVD is claimed to optimise both engine performance and fuel efficiency while also being eco-friendly.

[Read more…] about Kia car to feature ‘first’ CVVD engine technology

Robotic test facility opens in the Netherlands

by

Unique testing facility accelerates progress of robotics for inspection and maintenance

Quasset Test Facility has opened in the Netherlands to facilitate the experimentation and validation of robotic solutions for inspection and maintenance.

The 600-square-meter testing facility offers a highly flexible and controlled environment, housing a range of decommissioned assets which serve to test crawling, flying and swimming robotic systems.

As an independent facility, QTF provides third-party assessments of technology for robotic and inspection systems. From start-ups to leading oil and gas companies, service providers have the opportunity to work in consultation with QTF’s specialist robotics staff. [Read more…] about Robotic test facility opens in the Netherlands

Komatsu develops electric mini excavator

by

Komatsu Ltd has unveiled its electric mini excavator, based on its accumulated technological expertise of hybrid construction equipment and electric forklift trucks.

Equipped with an in-house developed new charger, high-voltage converter and other devices, it offers excavation performance on a par with the internal combustion model of the same power output, while achieving zero exhaust gas emissions and a dynamic reduction in noise levels.

Komatsu expects a wider range of applications for this machine, including construction work near hospitals or schools or in residential areas, where contractors pay special attention to exhaust gas and noise during work, as well as inside tunnels or buildings.

[Read more…] about Komatsu develops electric mini excavator

Okuma and Hartwig open tech centre in Houston

by

Okuma America Corporation, a world leader in CNC machine tool manufacturing, and Okuma distributor Hartwig, have opened a new Okuma Tech Center at Hartwig Houston in Texas, USA.

The 23,000 sq ft showroom which features more than 20 machine tools – including larger machines specifically built for the oil and gas industry.

Wade Anderson, Okuma Product Specialists Sales Manager and Tech Centers Manager, said: “The new space allows us to show the larger machines that are significant to the oil and gas industry, and our customers can see live-cutting applications demonstrated on these Okuma machine tools.”

US manufacturing sector is seeing ‘record investment’, says Pence

by

The manufacturing sector is experiencing a dramatic turnaround in business, according to figures released by the White House. 

President Donald Trump has consistently said he wants the manufacturing sector to grow and has personally intervened to persuade many large manufacturing companies to consider relocating or expanding their operations in the US.

However, the vast majority of manufacturing companies in the US are small businesses, of less than 100 people.  [Read more…] about US manufacturing sector is seeing ‘record investment’, says Pence