expertise

Micron launches robot design challenge

June 4, 2020 by David Edwards Leave a Comment

Micron Technology, a provider of memory and storage solutions, has launched its UV Robot Design Challenge.

The company says the competition is designed to address the growing need for reliable, low-cost ultraviolet light robotic solutions that can help automate disinfection and potentially combat the spread of Covid-19 and other diseases.

UV germicidal irradiation has been shown to destroy the RNA in viruses and can help mitigate the transmission of microbes, which can remain active on surfaces for prolonged periods of time. [Read more…] about Micron launches robot design challenge

nTopology and Oak Ridge National Laboratory partner to develop additive manufacturing technologies

April 22, 2020 by David Edwards Leave a Comment

nTopology has entered into a Cooperative Research and Development Agreement with Oak Ridge National Laboratory to advance the capabilities of additive manufacturing through integrated software toolkits and embed ORNL expertise into nTop software.

The plan is for these capabilities to be made available commercially to the broader advanced-manufacturing market.

The collaboration incorporates foundational nTopology software with ORNL-developed machine control capabilities on large-scale polymer additive manufacturing systems. [Read more…] about nTopology and Oak Ridge National Laboratory partner to develop additive manufacturing technologies

HAHN Group acquires DAHL Automation

April 9, 2020 by Sam Francis Leave a Comment

The HAHN Group has acquired DAHL Automation, expanding its competence in the field of intralogistics and autonomous mobile robots.

DAHL Automation is an integrator for robotics, collaborative robots, as well as autonomous mobile robots and automated guided vehicles.

The company has 30 employees currently employed at its headquarters in Meinerzhagen, Germany. [Read more…] about HAHN Group acquires DAHL Automation

ThyssenKrupp and Wilhelmsen to develop additive manufacturing solutions for shipbuilding

January 9, 2020 by Sam Francis Leave a Comment

ThyssenKrupp is collaborating with Wilhelmsen, one of the largest maritime products and services provider in the world, to jointly develop additive manufacturing enabled commercial solutions for the maritime industry.

Under the Memorandum of Agreement signed by both companies, ThyssenKrupp and Wilhelmsen’s Marine Products division will collaborate on providing 3D-printed components for maritime vessels, leveraging on ThyssenKrupp’s expertise in additive manufacturing alongside Wilhelmsen’s in-depth maritime expertise and direct ongoing experience of developing 3D printing as a service for vessels.

The collaboration will also leverage on the capabilities of the recently inaugurated ThyssenKrupp Tech Center in Singapore and its Global Additive Manufacturing Tech Center in Mulheim, which has been awarded the Approval of Manufacturer certificate by leading quality assurance and risk management firm DNV GL. [Read more…] about ThyssenKrupp and Wilhelmsen to develop additive manufacturing solutions for shipbuilding

ZVerse partners with 3D Systems to provide more access to expertise

November 20, 2019 by Sam Francis Leave a Comment

ZVerse, the developer of a CAD as a Service platform for digital manufacturing, is partnering with 3D Systems, a provider of parts manufacturing services.

The strategic alignment will provide 3D Systems’ customers with access to ZVerse’s network of certified designers who can lend their expertise to optimize file formats – facilitating desired final parts.

Theseservicesincludeeverythingfromdesignmodificationstorevisingfileformats to ensure the final part matches the customer’s requirements. [Read more…] about ZVerse partners with 3D Systems to provide more access to expertise

Rockwell Automation partners with Accenture to create digital solutions for industrial clients

November 19, 2019 by David Edwards Leave a Comment

Rockwell Automation and Accenture’s Industry X.0 are teaming up to develop a digital offering to help industrial clients “move beyond existing manufacturing solutions to transform their entire connected enterprise”.

The engagement is designed to capitalize on the expertise of both companies to deliver new capabilities for greater industrial supply chain optimization.

By providing customers with a single, trusted provider of digital solutions, the collaboration will enable clients to more effectively leverage the industrial internet of things and ultimately drive measurable growth outcomes. [Read more…] about Rockwell Automation partners with Accenture to create digital solutions for industrial clients

Omron, NTT, and Nokia partner to test 5G networks at manufacturing sites

September 20, 2019 by Mai Tao

Omron, NTT Docomo, and Nokia have agreed to jointly conduct trials utilizing the fifth-generation mobile communications system in factories and other manufacturing sites.

Through these trials, the three companies will jointly evaluate the usefulness and possibilities of 5G’s high-speed, large-capacity, low-latency, and simultaneous multiple connections with the aim of solving the challenges facing the manufacturing industry and developing communications technology required in manufacturing sites of the future.

In the manufacturing industry, the demand for wireless communications is increasing as efforts aimed at improving productivity through the use of IoT data make progress in dealing with various issues, such as a shortage of skilled workers and high-mix low-volume production. [Read more…] about Omron, NTT, and Nokia partner to test 5G networks at manufacturing sites

Kuka receives large order from Donghee for robotic welding systems

August 23, 2019 by Sam Francis

Industrial robot manufacturer Kuka says it has received an order in the “single-digit million euro range” from the Korean automotive supplier Donghee Industrial.

The order was booked in the second quarter of 2019.

Donghee relies on robot-based friction stir welding from Kuka in the area of electric mobility. [Read more…] about Kuka receives large order from Donghee for robotic welding systems

Intel acquires Omnitek to strengthen FPGA video and vision offering

May 10, 2019 by Anna

Intel Corporation has announced the acquisition of Omnitek, a leading provider of optimised video and vision FPGA IP solutions.

Omnitek’s technology enables customised high-performance vision and artificial intelligence (AI) inferencing capabilities on FPGAs in areas such as video conferencing, projection and display, medical vision systems, and more.

Based in Basingstoke, UK, Omnitek was founded in 1998 and has developed over 220 FPGA IP cores and accompanying software including performance-leading solutions for WARP, ISP processing and video connectivity.

[Read more…]

Komatsu develops electric mini excavator

May 7, 2019 by Anna

Komatsu Ltd has unveiled its electric mini excavator, based on its accumulated technological expertise of hybrid construction equipment and electric forklift trucks.

Equipped with an in-house developed new charger, high-voltage converter and other devices, it offers excavation performance on a par with the internal combustion model of the same power output, while achieving zero exhaust gas emissions and a dynamic reduction in noise levels.

Komatsu expects a wider range of applications for this machine, including construction work near hospitals or schools or in residential areas, where contractors pay special attention to exhaust gas and noise during work, as well as inside tunnels or buildings.

[Read more…]