hannover

Hannover Messe plans to put spotlight on logistics and digital transformation

November 20, 2019 by David Edwards Leave a Comment

Organisers of the Hannover Messe industrial trade show next year plan to put more of a spotlight on logistics and digital transformation.

Industry 4.0 and digitalization are transforming all sectors of the economy, including logistics, where once tried and proven material flow models are becoming obsolete as industry looks for new answers that promise greater flexibility and transparency.

This transformation process is a source of far-reaching opportunities and avenues for growth for all logistics providers. [Read more…] about Hannover Messe plans to put spotlight on logistics and digital transformation

Metalworking event EMO builds on successful previous event

September 22, 2019 by David Edwards

EMO Hannover 2019 closed its doors today following a six-day run. From 16 to 21 September, round about 117,000 production specialists from 150 countries convened at the world’s leading trade show for the metalworking industry.

Carl Martin Welcker, EMO general commissioner, says: “This EMO Hannover 2019 built on the success of our boom year in 2017.

“In the context of subdued economic expectations over the past several months, the moderate decline in attendance has to be viewed as a success. [Read more…] about Metalworking event EMO builds on successful previous event

Global industry ‘in midst of major change’ because of ‘megatrends’

September 18, 2019 by David Edwards

Hannover Messe 2020 will coincide with a period of rapid technological change and political and economic uncertainty, according to its organisers.

Sporting its 2020-season lead theme of “Industrial Transformation” and featuring some 6,000 exhibitors, the world’s top trade show for industrial technology will shine a light on the opportunities arising from new technologies, changing buyer behavior and a growing awareness of climate protection.

Experts at Deutsche Messe, one of the world’s largest industrial trade show companies and the owner of Hannover Messe, the global industrial sector is “in the midst of a period of major change”, driven primarily by the “megatrends” of digitization, individualization and climate protection.

At the same time, it is grappling with some very challenging economic and political fundamentals.

Dr Jochen Köckler, chairman of Deutsche Messe, says: “The world is embarking on a period of change, the likes of which we haven’t seen for a long time. [Read more…] about Global industry ‘in midst of major change’ because of ‘megatrends’

Metalworking event EMO opens amid news of greater investment

September 16, 2019 by David Edwards

One of Germany’s leading metal-working events, EMO, has opened today amid news of greater investment in the sector, as well as a greater emphasis on “smart” technologies – which usually refers to higher levels of automation and digitalisation.

Organisers claim EMO to be “the world’s leading metalworking trade fair”, and had a line-up of prominent figures for the launch, including:

Andreas Scheuer, Federal Minister of Transport and Digital Infrastructure;
Lower Saxony’s First Minister Stephan Weil;
Member of the Board of Management of Deutsche Telekom Adel Al-Saleh;
Cecimo President Dr Roland Feichtl; and
EMO General Commissioner Carl Martin Welcker.

EMO lasts for six days, and is located in the northern German city of Hannover. [Read more…] about Metalworking event EMO opens amid news of greater investment

ABB and Ericsson partner to accelerate wireless automation for flexible factories

May 21, 2019 by Sam Francis

Industrial automation provider ABB and telecommunications equipment company Ericsson have strengthened their commitment to accelerate the industrial ecosystem for flexible wireless automation, which will enable enhanced connected services, industrial IoT and artificial intelligence technologies in the future.

The partners signed a Memorandum of Understanding at Hannover Messe 2019, establishing their joint vision for future flexible production with automation and wireless communication.

The collaboration comes during the Industry 4.0 era and 5G connectivity which allow businesses to realize increased productivity, with the help of automation and digitalization. [Read more…] about ABB and Ericsson partner to accelerate wireless automation for flexible factories

Kollmorgen servo motors provide boost for robotics start-up

August 2, 2018 by David Edwards

Collaborative robots were a big feature of the Hannover Messe trade show again in 2018.

Small, intelligent, sensitive, and self-learning: The ways in which robots can be used are increasing all the time.

And the level of acceptance is also rising – not least thanks to attractive prices and short return-on-investment times. [Read more…] about Kollmorgen servo motors provide boost for robotics start-up

Chancellor Merkel hand in hand with the robot of tomorrow

May 10, 2018 by Anna

German Chancellor Angela Merkel explored the possibilities of the Schunk SVH 5-finger grippers at the Hannover Messe.

She visited the IBG Automation booth, where the head of the German government, together with Mexican President Enrique Peña Nieto and his wife Angélica Rivera, got up close and personal with the robotic hands of Schunk.

“The Hannover Messe has succeeded in impressively demonstrating that the digitization of industrial production and the trend toward Industry 4.0 will be pivotal global topics in the years ahead,” emphasized Henrik A. Schunk, Managing Partner, CEO, Schunk GmbH & Co. at the conclusion of the trade show.

Robustel launches LoRaWAN gateway R3000 LG at Hannover

April 27, 2018 by Anna

Robustel Technologies, an industrial IoT/M2M hardware and solution provider, is launching its new LoRaWAN Gateway R3000 LG at Hannover Messe 2018 in Germany.

Robustel R3000 LG is an industrial-grade LoRaWAN (Low Power Wide Area Network or LPWAN) gateway, integrated with LoRaWAN wireless communication technology and cellular network technology, to provide users with wireless long-distance data transmission services.

R3000 LG allows access to various types of LoRa application nodes, and supports wired Ethernet and wireless 4G/3G/2G accesses to the cloud platform, mainly for LoRaWAN data transmission between LoRa node and cloud platform.

Nord exhibits drives for digital factories at Hannover

April 27, 2018 by Anna

Nord Drivesystems are exhibiting drive solutions for digital factories of the future at the Hannover Fair 2018. These include Nordak Link decentralised field distributors, smart drives with cloud links for predictive maintenance, as well as LogiDrive – the drive solution for intralogistics.

The Nordak Link series field distributor for applications in modern, networked intralogistics systems is a drive control for flexible close-to-the-motor installation. It is available as a frequency inverter (up to 7.5 kW) or a motor starter (up to 3 kW) and enables rapid commissioning, simple operation and maintenance, says the company.

Thanks to an integrated PLC and compatibility with all common bus systems, the freely configurable field distributor can be integrated into all modern automation systems.

Delta demonstrates smart manufacturing capabilities at Hannover

April 25, 2018 by Anna

Delta, a provider of industrial automation solutions, unveiled its integrated smart factory and energy management solutions at Hannover Messe 2018.

Delta’s High-Flexibility Multi-Tasking Smart Production Line features integration of our digital manufacturing monitoring platforms, IIoT technologies, three robot workstations and a smart conveyor to let visitors perform on-site order processing and real-time monitoring of the customized production process.

In addition, the new 3D Vision Inspection System enhances logistics efficiency through precise package shape and dimension identification.