Robotics & Automation News

Where Innovation Meets Imagination

equipment

355 welding robots at new Byton car plant in China

by

Byton, the electric vehicle maker, has announced it will complete its Round C fundraising in mid-2019 with support from multiple investors and shared further details of its Nanjing factory.

Construction of the plant, which started in September 2017, is nearing completion and trial production of the M-Byte SUV will start in the third quarter of 2019.

The installation and commissioning of key equipment has already begun in the five major workshops: stamping, paint, welding, battery, and assembly.

[Read more…] about 355 welding robots at new Byton car plant in China

FEIMEC 2020 launches its new sales cycle as the ‘largest exhibition in the industry in Latin America’

by

The third edition of the machinery and industrial equipment trade show FEIMEC will have even more exhibition space than in previous years. Its official launch occurs within a moment of positive expectations for the Brazilian market.

Within the marketplace’s positive expectations for economic growth, the third edition of FEIMEC 2020 – Brazil International Machinery and Equipment Exhibition has been launched.

The exhibition will take place in Sao Paulo on May 5-9, 2020 and will have 62,000 sq m of exhibition space, 700 exhibitors and will receive over 65,000 industry professionals.

[Read more…] about FEIMEC 2020 launches its new sales cycle as the ‘largest exhibition in the industry in Latin America’

Exoskeleton market projected to grow to $6 billion

by

The current robotics limelight tends to focus on the ability of new innovations to automate tasks, but a less publicized development is taking place whereby passive exoskeletons have been slowly deployed and adopted to help augment the capability of human workers.

Exoskeleton popularization through passive suits will provide a base for increased resources for powered suits, which will eventually provide significant augmentative capability to the industrial workforce.

By 2028, global Exoskeleton revenues will reach $5 billion with hundreds of thousands of active exoskeletons being deployed, according to ABI Research. The research consultancy’s findings are on its report, Exoskeletons for Industrial Use Cases.

[Read more…] about Exoskeleton market projected to grow to $6 billion

Komatsu develops electric mini excavator

by

Komatsu Ltd has unveiled its electric mini excavator, based on its accumulated technological expertise of hybrid construction equipment and electric forklift trucks.

Equipped with an in-house developed new charger, high-voltage converter and other devices, it offers excavation performance on a par with the internal combustion model of the same power output, while achieving zero exhaust gas emissions and a dynamic reduction in noise levels.

Komatsu expects a wider range of applications for this machine, including construction work near hospitals or schools or in residential areas, where contractors pay special attention to exhaust gas and noise during work, as well as inside tunnels or buildings.

[Read more…] about Komatsu develops electric mini excavator

Mitsubishi improves visualisation on its human machine interface

by

The GT2107 Wide Series Human Machine Interface
The GT2107 Wide Series Human Machine Interface

Mitsubishi has updated its human machine interface and integrated what it says is improved visibility and performance. 

The company says the improvements to its GT2107 HMI were driven by “end user demand”.

Mitsubishi says the GT2107 is an interface that monitors and controls machine components with a graphical touchscreen that connects to equipment such as programmable logic controllers, variable frequency drives and servos.

The compact HMI features a 7-inch wide display with 800 x 480 resolution for clear image quality and is equipped with a remote connectivity option through a virtual network computing server. [Read more…] about Mitsubishi improves visualisation on its human machine interface

Yaskawa invests €4 million in production facility in Sweden, and partners with Midea in Asia

by

yaskawa_new-swedish-facility
Yaskawa facility in Torsås, Sweden. Picture credit: Yaskawa via Evertiq

Yaskawa is expanding its manufacturing operation in Sweden, according to a report on Evertiq.com.

One of the world’s largest industrial robot manufacturers, Yaskawa is investing a further €4 million into the plant at Torsås, Sweden.

The work will eventually expand the facility by 2,000 sq m and is expected to be completed by summer 2018.  [Read more…] about Yaskawa invests €4 million in production facility in Sweden, and partners with Midea in Asia

The advantages of automation in medical diagnostics

by

ats automation medical diagnostics

Technology in the fields of life sciences and medicine is constantly evolving. New manufacturing techniques have made it possible to make more effective therapies, and advances in research have led to more cost-effective solutions to conditions that were once considered too expensive to treat.

One of the most interesting aspects of the evolution of medical technology is the constantly increasing involvement of automation in various medical operations, particularly in diagnostics.

Back then, essential diagnostic procedures relied on manual procedures. While conventional methods were successful to a certain degree, they are hampered by certain limitations.

For instance, manual testing of specimens is slow and prone to mistakes caused by poor human judgment. Automation helps get rid of these limitations to achieve more accurate results in less time.  [Read more…] about The advantages of automation in medical diagnostics

Distec and Red Lion Controls host event to demonstrate smart factory technology

by

distec red lion

Industrial computing specialist Distec is partnering with industrial automation and networking expert Red Lion Controls to host a smart factory day on March 28, 2017.

The event, which will be held at the De Vere Cranage Estate in Cheshire, UK is designed to give plant managers an overview of the benefits of smart factory technology.

The day will feature speakers discussing their experiences using the latest automation technology to build smart factory environments.

Plant managers and engineers can also view live demo kits to get a hands-on experience of the automation technology that’s helping to build the current and next generation of smart factory. Technical staff will also be on hand to answer questions about the technology and its use in factories.  [Read more…] about Distec and Red Lion Controls host event to demonstrate smart factory technology

Pearson becomes Fanuc certified servicing integrator

by

Pearson Packaging Systems
Pearson Packaging Systems technicians have earned what they say is a much-sought-after accreditation

Pearson says its technicians have complete Fanuc’s extensive training program and earn a “hard-to-come-by accreditation” to perform robotic troubleshooting and repair work

Pearson Packaging Systems, a provider of automation solutions and longstanding Fanuc partner, has become a Fanuc-certified servicing integrator. 

Pearson is now able to augment its service offering to customers by taking full responsibility for diagnosing issues and executing warranty repairs that would previously have required Fanuc-direct assistance.

The Fanuc seal of approval is “held by less than 5 per cent of all authorized system integrators nationwide”, accorind to Pearson, which claims to be the only integrator on the West Coast with such an accreditation.  [Read more…] about Pearson becomes Fanuc certified servicing integrator

Boeing completes prototype parts for 777X wing at new billion-dollar advanced manufacturing facility

by

Boeing says it has completed prototype parts for the wing of its new 777X Dreamliner aircraft. 

The company is using advanced manufacturing methods, including additive or 3D printing, in the construction of the passenger plane at its new $1 billion Everett, Washington facility.

When completed, the wing for the 777X will be the largest wing Boeing has ever built.  [Read more…] about Boeing completes prototype parts for 777X wing at new billion-dollar advanced manufacturing facility