Robotics & Automation News

Where Innovation Meets Imagination

processes

Comau features its exoskeleton in Pack Expo robotics showcase

by

Comau, an industrial automation company and part of the Fiat Chrysler Group, is presenting its Muscular Aiding Tech Exoskeleton (Mate) in the all new Robotic Zone (booth N-850G) at Pack Expo Las Vegas.

Visitors to Comau’s interactive booth will have the opportunity to experience firsthand the benefit of incorporating exoskeletons into material handling processes by wearing a Mate in a typical pick and place operation.

Mate has been designed to improve work quality in an efficient and highly ergonomic manner by providing consistent and advanced movement assistance during prolonged overhead, as well as daily tasks. [Read more…] about Comau features its exoskeleton in Pack Expo robotics showcase

Comau ‘Mate’ exoskeleton used in CC Jensen’s manufacturing processes

by

Danish company CC Jensen is using exoskeletons from Comau in its manufacturing processes.

Comau calls its exoskeleton ‘Mate’ and has been supplying it to the market for around a year.

CC Jensen specialises in the design and manufacturing of oil filtration solutions, and says it uses Mate to better support workers in carrying out their daily activities. [Read more…] about Comau ‘Mate’ exoskeleton used in CC Jensen’s manufacturing processes

Metalworking event EMO opens amid news of greater investment

by

One of Germany’s leading metal-working events, EMO, has opened today amid news of greater investment in the sector, as well as a greater emphasis on “smart” technologies – which usually refers to higher levels of automation and digitalisation. 

Organisers claim EMO to be “the world’s leading metalworking trade fair”, and had a line-up of prominent figures for the launch, including:

  • Andreas Scheuer, Federal Minister of Transport and Digital Infrastructure;
  • Lower Saxony’s First Minister Stephan Weil;
  • Member of the Board of Management of Deutsche Telekom Adel Al-Saleh;
  • Cecimo President Dr Roland Feichtl; and
  • EMO General Commissioner Carl Martin Welcker.

EMO lasts for six days, and is located in the northern German city of Hannover. [Read more…] about Metalworking event EMO opens amid news of greater investment

SICK to showcase indoor localization technology that lets you know where all your machines are at all times

by

SICK is unveiling indoor localization technology which lets users know where all their machines are at all times.

The sensor supplier is planning to showcase the system at the Pack Expo Las Vegas later this month.

SICK says it has taken another step toward Industry 4.0 by offering a new, comprehensive indoor localization portfolio. [Read more…] about SICK to showcase indoor localization technology that lets you know where all your machines are at all times

Dos and Don’ts of Robotic Process Automation in Your Business Enterprise

by

Enterprises often have incompatible legacy applications that have to be manually interfaced. This involves repetitive processes that reduce the productivity of their employees.

Major replacement of these legacy apps is undesirable due to the costs and the time required for the overhaul. This is where Robotic Process Automation (RPA) fits perfectly.

According to Gartner, RPA revenue for the year 2018 reached $846 million in 2018, up by 63 percent from the previous year. In 2019, this number is expected to reach $1.3 billion. [Read more…] about Dos and Don’ts of Robotic Process Automation in Your Business Enterprise

Continental reveals its new virtual dashboard

by

Automotive components and parts supplier Continental has unveiled its new virtual dashboard, saying it represents a “complete culture change”.

Continental will be formally launching what it calls its “Integrated Interior Platform” at the IAA 2019 in Frankfurt later this month.

As a high-performance computer, this comprehensive solution for software and hardware provides the basis for interaction between humans and vehicles in the connected cockpit of tomorrow – and at the highest level of quality. [Read more…] about Continental reveals its new virtual dashboard

SLAM software paving the way for new generation autonomous mobile robots

by

Simultaneous Localization and Mapping (SLAM), a software-and-hardware technology which enables a mobile device to map its environment while positioning itself within it, is a crucial driver for robotics.

SLAM will enable the transition from automated guided vehicles (AGVs) to autonomous mobile robots (AMRs) in the industrial space.

According to report by global tech market advisory firm, ABI Research, the installed base of SLAM-enabled commercial and industrial robots will exceed 15 million by 2030. [Read more…] about SLAM software paving the way for new generation autonomous mobile robots

Audi virtually tests assembly processes for concept car

by

Audi is embracing virtual reality (VR) with the Audi e-tron GT concept car. Using VR glasses and controllers, employees from various departments test all assembly processes entirely virtually.

Audi has developed in-house software for the process, which relies on 360-degree scans that provide a three-dimensional indoor map. The technology is being used for the first time at the Neckarsulm site.

Workflows along the assembly line and the associated logistics processes are being tested in “3P workshops”.  3P stands for the Production Preparation Process, and is used for process validation.

[Read more…] about Audi virtually tests assembly processes for concept car

New Scale Robotics launches ‘first multi-tool mount system’ for smallest collaborative robots

by

New Scale Robotics has launched what it says is “the first multi-tool mounting system for the smallest collaborative robots”.

The new NSR-MTM-3-URe Multi-Tool Mount (NSR-MTM) System allows users to mount and control up to three grippers or other tools on one Universal Robots (UR) e-Series cobot. [Read more…] about New Scale Robotics launches ‘first multi-tool mount system’ for smallest collaborative robots

Hyundai reorganises R&D centre structure to streamline vehicle development

by

Hyundai Motor Group has begun a series of sweeping changes to its R&D organisations and development processes, enabling greater responsiveness to the changing future mobility technology landscape.

Promoting a keener focus on customer needs, the new approach will also streamline the decision-making and development processes to achieve efficiencies and cost optimisation.

Through reorganisation under Architecture-Driven System-Based Organisation (SBO), technology units at the Group’s R&D Division in Korea will align their operational processes to transform the Group.

[Read more…] about Hyundai reorganises R&D centre structure to streamline vehicle development