Robotics & Automation News

Market trends and business perspectives

increased

Innodisk releases industrial-grade solid-state disks with ‘world’s highest capacity’

by Leave a Comment

Innodisk, a provider of industrial flash and memory solutions, has released its industrial-grade 112-Layer 3D TLC SSDs along with “the world’s highest capacity up to 8TB”.

The 112-layer SSDs introduces a complete product line including the SATA 3TG6-P and 3TE7 series, as well as the PCIe Gen3x4 and Gen4x4 series.

The new TLC SSD Series marks Innodisk’s continued development with 3D NAND design, bringing better efficiency, faster performance, and increased capacity. [Read more…] about Innodisk releases industrial-grade solid-state disks with ‘world’s highest capacity’

New S&P Analysis: Stressed semiconductor industry needs water, gets liberal sprinkling of state support

by Leave a Comment

By Christopher Rogers, senior researcher, Panjiva, part of S&P Global

The global semiconductor industry is in the midst of a period of upheaval driven by both short- and long-term factors.

The most obvious has been the imbalance in supply versus demand shown by shortages in the automotive industry, as discussed in Panjiva’s research of May 18, resulting in higher prices.

There are also emergent challenges from water shortages in Taiwan – which accounted for 14.4 percent of global exports in 2019 – that are causing power shortages and potential semiconductor fabrication facility closures, according to Nikkei Asia. [Read more…] about New S&P Analysis: Stressed semiconductor industry needs water, gets liberal sprinkling of state support

Opinion: Collaborative robots enable effective high-mix, low-volume production

by Leave a Comment

Oliver Giertz, product manager for servo/motion and robotics for the EMEA region at Mitsubishi Electric, factory automation, explains how collaborative robots are helping manufacturers to increase flexibility, boost quality, and drive down operational costs.

With increased competition, often on a global scale, manufacturers need to differentiate themselves by tailoring products more closely to customer demand.

This, of course, carries with it an implicit reduction in batch sizes and has seen the rise of high-mix, low-volume production.

Collaborative robots, or cobots, can enable manufacturers to effectively meet individual customer requirements with greater product variety in smaller batches. [Read more…] about Opinion: Collaborative robots enable effective high-mix, low-volume production

Safety for Workers, Here is What You Should Know

by 2 Comments

Safety within the construction industry and beyond this is vital for the reputation of your business and the welfare of your workers.

It may begin with ensuring that they have the correct training for the job, as well as ensuring that you check drivers license status on all new workers.

However, safety now goes beyond the initial security checks. [Read more…] about Safety for Workers, Here is What You Should Know

B&R unveils ‘high-end’ computer for autonomous agricultural and construction vehicles

by Leave a Comment

Industrial automation company B&R, a subsidiary of ABB, is adding a new high-end computer to its mobile automation portfolio.

The company says the new computer offers significantly more processing power and memory, giving it plenty of resources to implement autonomous functions for agricultural and construction vehicles or self-driving transport systems.

The computer is specially designed to perform in harsh environments. The housing temperature can be between -40°C and +85°C. The computer is also highly resistant to shock and vibration. [Read more…] about B&R unveils ‘high-end’ computer for autonomous agricultural and construction vehicles

K.Hartwall launches new ‘autonomous mobile robot’

by Leave a Comment

K.Hartwall has launched a new “autonomous mobile robot” called A-Mate. The company says this is the first fully electric free-lift pallet “AGV” with omnidirectional drive on the market. 

K.Hartwall calls its new machine an AGV as well as an AMR, which indicates the ongoing merging of the two technologies across the industry.

The company says the A-Mate is an extremely versatile mobile robot that will bring a new level of automation to intra-logistics, and to the movements of different load carriers, from pallets to roll containers and foldable cages or “gitter” boxes. [Read more…] about K.Hartwall launches new ‘autonomous mobile robot’

Are Robots After Your Job?

by Leave a Comment

With all the new technology being developed lately, it’s common to worry about job security, especially when we consider that robotics and automation are bound to eventually replace a lot of workers. In fact, it’s pretty common to find businesses automating tasks that we once performed by humans.

Not only are machines more reliable, they’re also unhindered by things like fatigue and stress, which essentially minimizes the margin of error.

Coupled with the Covid-19 pandemic and the migration of business to the online landscape, job security is now more important than ever. [Read more…] about Are Robots After Your Job?

Mitsubishi launches ‘smallest, most compact’ programmable logic controller

by Leave a Comment

Mitsubishi Electric has released the company’s smallest and most powerful compact programmable logic controller to date – the FX5UC series Premium Micro PLC.

The company says the new PLC’s diminutive size is set to help machine builders and manufacturers pack “ever more functionality into a smaller space”, while also providing the web access and network connectivity demanded by the latest smart factory applications.

Mitsubishi Electric launched its first range of micro controllers, the FX family of PLCs, over 35 years ago as part of the MELSEC-F series. [Read more…] about Mitsubishi launches ‘smallest, most compact’ programmable logic controller

Festo and Siemens integrate multi-carrier system into Bosch Rexroth transfer process

by

Siemens and Festo are presenting an innovative linear motor drive and control concept, designed to offer flexible and efficient high-performance solutions for short-cycle applications.

The Multi-Carrier-System (MCS) from Siemens and Festo has been integrated into the Rexroth TS 2plus transfer system, thus adding the modular MCS to Bosch Rexroth’s versatile building-block system based on standardised units.

The advantages of the existing systems have been merged, and users are free to combine them in almost any way they wish to achieve maximum flexibility in their processes.

[Read more…] about Festo and Siemens integrate multi-carrier system into Bosch Rexroth transfer process

Oceaneering selected to ‘digitally’ transform Pacific Drilling’s global fleet

by

Oceaneering International, Inc., and Pacific Drilling have entered into a five-year Digital Services Package agreement to provide Pacific’s customers with better reliability and improved throughput enabling streaming video and real-time data.

This will allow the provision of emerging services such as remote ROV piloting, surveying, and automation aboard Pacific Drilling’s high-specification drillship fleet.

As a result of these efforts, Pacific Drilling’s customers can benefit from higher security, increased access and management of third parties as well as new and expanded digital services.

[Read more…] about Oceaneering selected to ‘digitally’ transform Pacific Drilling’s global fleet

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close