Robotics & Automation News

Where Innovation Meets Imagination

News

Bain report: Humanoid robots still in pilot stage as industry prepares for waves of adoption

by

Humanoid robots may be generating headlines and billions in investment, but most deployments remain in the pilot phase, according to Bain & Company’s newly released Global Technology Report 2025.

The consulting firm said humanoids attracted about $2.5 billion in venture capital funding in 2024, driven in part by demographic pressures in advanced economies. Yet despite growing expectations, the reality is that today’s humanoids are “heavily dependent on human input for navigation, dexterity, or task switching”.

Bain’s report, in a chapter titled Humanoid Robots: From Demos to Deployment, highlights both rapid progress and persistent obstacles. Intelligence and perception are nearing human parity, thanks to advances in generative AI and vision systems, but battery performance and fine motor handling remain far behind. [Read more…] about Bain report: Humanoid robots still in pilot stage as industry prepares for waves of adoption

ABB Robotics launches OmniCore EyeMotion for vision-powered autonomy

by

ABB Robotics has launched OmniCore EyeMotion, which enables any OmniCore-powered robot to recognize its surroundings using any third-party camera or sensor and adapt in real time, even in complex applications.

Marc Segura, president of ABB Robotics, says: “Over the past decade, we have evolved AI vision to give robots “eyes” that can see the world in 3D, but previously this required advanced camera hardware.

“In one step, OmniCore EyeMotion grants any robot the ability to both see and understand the world around it, for a wide range of 2D and 3D vision-based applications, advancing autonomy and versatility.” [Read more…] about ABB Robotics launches OmniCore EyeMotion for vision-powered autonomy

Pudu Robotics launches self-cleaning docking station for its robots

by

Pudu Robotics, a provider of service robotics, has launched the Self-Cleaning Docking Station, the latest addition to the Pudu CC1 Series ecosystem.

The new docking station enables the Pudu CC1 series to perform automated, dock-assisted cleaning cycles that keep critical cleaning components in peak condition while substantially reducing routine upkeep.

The Self-Cleaning Docking Station expands Pudu’s portfolio of cleaning solutions which includes the standard Docking Station for automated refilling, drainage, and charging, and the Mobile Water Station for flexible deployment in facilities without direct plumbing access.

Together, these innovations give facility operators a complete set of tools for achieving consistent, unattended cleaning. [Read more…] about Pudu Robotics launches self-cleaning docking station for its robots

MassRobotics, AWS, and Nvidia launch first-of-its-kind physical AI fellowship

by

The program aims at accelerating research and development of startups building at the intersection of physical AI and robotics

MassRobotics has announced the Physical AI Fellowship, a virtual program powered by Amazon Web Services Startups and Nvidia Inception to help high-potential robotics startups build, refine, and scale physical AI solutions.

The inaugural Fall 2025 cohort includes some of the most promising startups working within physical AI and serving a multitude of industries. Throughout the program, fellows will work one-on-one with scientists and engineers from the AWS Generative AI Innovation Center to refine their physical AI solutions.

Physical AI is increasingly critical to the development of complex hardware, especially robotics. Delivering advanced tools and support to startups will help the AI-powered robotics industry grow exponentially. [Read more…] about MassRobotics, AWS, and Nvidia launch first-of-its-kind physical AI fellowship

Symbotic integrates Nyobolt’s new ‘performance-improving’ power technology into its autonomous mobile robots

by

Symbotic, a provider of AI-enabled robotics technology for the supply chain, says it will roll out new battery technology from Nyobolt – a pioneer of high-power, ultra-fast charging power solutions – for its SymBot autonomous mobile robots.

The technology will enable improved performance and durability for Symbotic’s “industry-leading warehouse automation system”.

The new solution has six times more energy capacity and is 40 percent lighter, compared to the ultracapacitors used in SymBot mobile robots today. [Read more…] about Symbotic integrates Nyobolt’s new ‘performance-improving’ power technology into its autonomous mobile robots

Vonaer to purchase 20 hybrid eVTOL aircraft from Plana

by

Advanced air mobility company Plana has signed a letter of intent to sell 20 hybrid eVTOL (electric vertical takeoff and landing) aircraft to Vonaer, a Korea-based air mobility service provider.

Under the agreement, Plana will supply Vonaer with five certified aircraft by 2033 and an additional 15 by 2040.

Throughout this contract, Plana has secured pre-orders for a total of 127 aircraft, amounting to a supply agreement of $664 million. [Read more…] about Vonaer to purchase 20 hybrid eVTOL aircraft from Plana

JR Automation invests $4 million in Forever Feed Technologies

by

JR Automation has made a strategic investment valued at over $4 million into Forever Feed Technologies to implement eight indoor FFT Grow Systems, with core components ordered in Q4/2025.

Each FFT Grow System is designed to produce up to 50 tons of ForeverFeed sprouted grain per day using 95 percent less water than field grown alfalfa.

FFT integrated its proprietary indoor growing protocols with JRA’s automation and digital technology expertise to design and build a patented, large-scale growing system capable of feeding more than 2,500 dairy or beef animals. [Read more…] about JR Automation invests $4 million in Forever Feed Technologies

Comau showcases welding and robotics portfolio at Schweissen & Schneiden 2025

by

Comau used this year’s Schweissen & Schneiden trade fair in Essen to showcase a wide range of welding and robotics technologies, including collaborative robots, wearable exoskeletons, mobile welding systems, and advanced training platforms.

The Italian automation company presented its portfolio at Booth C27 in Hall 2, positioning itself as a supplier of both industrial and collaborative solutions designed to improve productivity and flexibility across different sectors.

Among the systems on display was a new arc welding cell built around the company’s S-Series robot, in its 18 kg payload version (S-18). Comau said the robot was designed for high performance and precision in space-constrained industrial environments. [Read more…] about Comau showcases welding and robotics portfolio at Schweissen & Schneiden 2025

Fanuc showcases robotic welding, machining and painting systems

by

Fanuc America highlighted its latest automation technologies at FABTECH 2025 in Chicago, demonstrating how robotics, CNC systems, and collaborative automation can boost productivity and address labor shortages.

At its main booth, Fanuc presented robotic welding demonstrations aimed at small and mid-sized manufacturers.

In one setup, two CRX-10iA cobots worked together to assemble, weld and deburr a washer and nut component, while a CRX-30iA equipped with 3DV/200 vision technology handled the finished part. [Read more…] about Fanuc showcases robotic welding, machining and painting systems

Kawasaki Robotics unveils new cobots and robotic welding cell

by

Kawasaki Robotics highlighted new collaborative robots, weld carts, and live demonstrations at FABTECH 2025 in Chicago under the theme “Unleash the Spark”.

Attendees saw hands-on welding demos, the compact VeloWeld Velo-S Cell, and even had the chance to bring their own part (up to 40 inches in diameter) to watch it welded on the show floor.

The company introduced its CL Series Cobot Weld Carts, designed to make robotic welding accessible for shops of all sizes. [Read more…] about Kawasaki Robotics unveils new cobots and robotic welding cell