Robotics & Automation News

Where Innovation Meets Imagination

siemens

Construction starts at the world’s largest hydrogen pilot plant

by

An EU-funded flagship project, the H2FUTURE project consortium, has officially given the go-ahead for construction of the world’s largest pilot plant for the production of “green” hydrogen at the Voestalpine site in Linz, Austria.

With a capacity of 6 megawatts, this is the most effective and advanced plant of its type. It is scheduled to be fully operational by spring 2019.

The partners,  consisting of Voestalpine, Siemens, Verbund, and Austrian Power Grid, together with the research partners K1-MET and ECN, will use this facility to research into future breakthrough technologies which are needed for a CO2-reduced energy future and the decarbonization of steel production to meet global climate goals over the long-term.

[Read more…] about Construction starts at the world’s largest hydrogen pilot plant

Siemens uses additive manufacturing to produce gas turbines

by

Siemens says that additive manufacturing has the potential to become a new key technology, opening up new attractive prospects in the manufacture of gas turbines. The company has been investing in this technology right from its inception, and is now driving the industrialization and commercialization of these processes.

Additive manufacturing is a process that builds parts layer-by-layer from sliced CAD models to form solid objects, which enables highly precise solutions to be formed from powdered high-performance materials.

Siemens is a pioneer in additive manufacturing and already uses the technology for rapid prototyping. The company is now developing solutions ready for series-production for manufacturing gas turbine burner nozzles and repairing burner heads.

[Read more…] about Siemens uses additive manufacturing to produce gas turbines

New Siemens simulation to test self-driving cars

by

Siemens has introduced a simulation solution which minimizes the need for extensive physical prototyping while dramatically reducing the number of logged test miles necessary to demonstrate the safety of autonomous vehicles.

Leveraging advanced, physics-based simulation and innovative sensor data processing technologies, the new Siemens solution is designed to help automakers and their suppliers address this industry challenge with the potential to shave years off the development, verification and validation of self-driving cars.

According a report issued by the Rand Corporation, autonomous vehicle prototypes would have to be driven hundreds of millions of miles over the course of several decades to demonstrate their reliability in terms of fatalities and injuries – an outcome the authors deemed inconsistent with the near-term commercial viability of self-driving cars.

[Read more…] about New Siemens simulation to test self-driving cars

Siemens and Atos reinforce their strategic cooperation

by

Siemens and Atos are reinforcing their strategic co-operation, with plans to accelerate their joint business until 2020 through an ambitious joint go-to-market plan and the strengthening of their joint innovation and investment program.

The program has been increased by €100 million, totaling €330 million – more than three times the original sum. This will further support the Siemens and Atos IoT MindSphere-Codex strategic co-operation as well as the joint go-to-market.

The program aims to enhance Siemens and Atos’ digital strategy and develop joint capabilities in Data Analytics, Artificial Intelligence, advanced IoT & connectivity services, cyber security and digital service technologies to support the digital transformation of their customers through an end-to-end IoT suite.

[Read more…] about Siemens and Atos reinforce their strategic cooperation

Siemens to triple investment in Brazil

by

Siemens has signed a Memorandum of Understanding (MoU) with the Brazilian Trade and Investment Promotion Agency (Apex-Brasil) in São Paulo.

Over the next five years, Siemens plans to triple its investments in the country to up to €1 billion, focusing on initiatives relating to electrification, automation and digitalization.

The MoU addresses shortcomings in Brazil’s infrastructure in the areas of energy, transportation and healthcare while also supporting greater competitiveness for local industries through increased productivity, which is to be driven primarily by digitalization and enhanced energy efficiency.

[Read more…] about Siemens to triple investment in Brazil

Robot used to remove burner in gas-fired power plant

by

Removing a burner from inside a gas turbine is a tricky task. Siemens decided to use a Kawasaki robot to perform this maintenance operation, which heralds the way for reduced outage times for power plant operators.

This Kawasaki MG10HL robot, installed at the Siemens Lausward power plant in Dusseldorf, has a payload capacity of up to 1,000 kg and a 4-metre reach. The powerful, extra large payload Kawasaki robot was installed to perform the dangerous, routine maintenance task of replacing burners and transitions on huge gas turbines.

Watch the video here

Siemens Mentor releases FloMaster thermo-fluid solution with CAD connectivity and new physics

by

Mentor, a Siemens software business, has launched the latest release of its FloMaster 1D thermo-fluid system modeling product.

Combining integration with 3D mechanical computer-aided design (MCAD) with new physics and an improved user experience, the latest release of the FloMaster tool is the result of extensive years of research and development, and accuracy validated by running more than 13 million unit test runs.

The new FloMaster release offers significant advancements in productivity through automated connectivity to 3D CAD design tools.  [Read more…] about Siemens Mentor releases FloMaster thermo-fluid solution with CAD connectivity and new physics

Siemens to present digital enterprise solutions at Hannover

by

At the Hannover Messe 2018, Siemens will be showcasing a comprehensive series of examples which demonstrate how users can harness the potential of Industrie 4.0 by implementing digital enterprise solutions.

The focus will be on industry-specific implementation of digital enterprise solutions over the whole life cycle.

Examples from aerospace, automotive, food and beverage, electronics and machine building as well as the chemical, fiber and oil and gas industries illustrate how companies of any size and from any industry can increase their competitiveness with individual digital solutions – through greater flexibility, efficiency and quality as well as shorter times to market.

[Read more…] about Siemens to present digital enterprise solutions at Hannover

Team Penske forms technical partnership with Siemens

by

Engineering giant Siemens will support Team Penske’s Nascar, Indycar and Supercar programs in a partnership between the two companies.

Team Penske will implement Siemens’ software for digital design and simulation.

The new technical partnership between Team Penske and Siemens is a multi-year agreement.  [Read more…] about Team Penske forms technical partnership with Siemens

Siemens extends digital industrial network

by

Siemens has set up 20 centers for digital customer applications in the industrial sector. Each of these MindSphere Application Centers for digital offerings from Siemens spans multiple locations in different countries and specializes in a particular industry in which Siemens is active.

Today, around 900 software developers, data specialists and engineers are already working together with Siemens customers at these centers to develop digital innovations for data analysis and machine learning.

These new solutions are being developed on MindSphere, Siemens’ open, cloud-based operating system for the Internet of Things (IoT). To be close to its customers, the company has distributed its 20 centers across around 50 locations in 17 countries worldwide.

[Read more…] about Siemens extends digital industrial network