Robotics & Automation News

Where Innovation Meets Imagination

high-speed

Mazak launches new laser processing machine for small and medium diameter tube

by

Yamazaki Mazak is launching a new high-productivity laser processing machine specifically designed for the high-speed, large lot cutting of small and medium diameter tube.

The new FT-150 FIBER is a compact laser processing machine that benefits from an ergonomic design, with the operator area, loading station and unloading station all located on the same side.

Equipped with a 3.0kW fiber resonator, the FT-150 FIBER can process single workpieces up to 6,500mm in length and 150kg in weight, with a maximum tube diameter of 152.4mm. 8,000mm and 180kg options are also available. [Read more…] about Mazak launches new laser processing machine for small and medium diameter tube

Arrow Electronics and Exor launch IoT edge platform for smart factories

by

Arrow Electronics has collaborated with Exor Embedded to create gigaSOM gS01, a full production design and an additional development kit featuring a high-performance, energy-efficient system on module (SOM) for IoT edge deployments.

The SOM combines the power and efficiency of the Intel Atom E3900 processor series with the flexibility of an Intel Cyclone 10 GX FPGA, connected with a high-bandwidth dual-lane PCIe interface to create a unified high-performing engine.

gigaSOM gS01 is a combined X86 CPU and Intel high-speed FPGA design on a single system on module. [Read more…] about Arrow Electronics and Exor launch IoT edge platform for smart factories

AMS launches new position sensors for high-speed electric motors to ‘improve car industry’s electrification efforts’

by

AMS, a supplier of high performance sensor solutions, has introduced new position sensors that it says lower system cost and enhance electrification of safety-critical vehicle functions such as power steering, active damper control, and braking for safer, smarter, and greener cars.

The two new position sensors – the ams AS5147U and the AS5247U – bring new benefits and a lower system cost to the automotive industry, says ams.

The ams AS5147U is an intelligent magnetic rotary position sensor chip for use in electric motors that run at speeds up to 28,000 rpm. [Read more…] about AMS launches new position sensors for high-speed electric motors to ‘improve car industry’s electrification efforts’

Mazak launches new 5-axis vertical machining centre

by

Yamazaki Mazak has unveiled a new high-accuracy simultaneous 5-axis vertical machining centre, the Variaxis C-600, suitable for a wide range of sectors, including the aerospace and automotive markets.

Mazak says the C-600, which is the successor machine to the highly successful Variaxis j-600/5X, is being marketed at a “highly attractive price point” to provide a high performance and cost-effective 5-axis solution.

The Variaxis C-600 is characterised by its highly agile performance, with no compromise on rigidity. The compact machine, capable of machining workpieces up to Ø730 mm x H450 mm and 500 kg in weight, has been designed with a large machining envelope and a high-rigidity structure featuring a Ø600 mm fully supported trunnion table with roller gear cam on the B- and C-axes. [Read more…] about Mazak launches new 5-axis vertical machining centre

Maxim launches ‘industry’s smallest’ LiDAR integrated circuits

by

Chipmaker Maxim Integrated has unveiled what it says is “the industry’s smallest light detection and ranging integrated circuits”.

The company says the ICs provide twice the bandwidth than competing ICs and are intended for faster self-driving cars.

Maxim says designers of automotive self-driving systems can now enable higher-speed autonomous driving through the industry’s fastest and smallest LiDAR ICs. [Read more…] about Maxim launches ‘industry’s smallest’ LiDAR integrated circuits

NXP launches new ‘multi-gigabit’ automotive Ethernet switch for time-sensitive networking

by

NXP, one of the world’s largest suppliers of automotive semiconductors, has launched a “multi-gigabit Ethernet switch” designed to help automakers deliver the high-speed networks required for evolving connected vehicles.

NXP says its SJA1110 is “the first automotive Ethernet switch with safety capabilities built in”, offering integrated 100BASE-T1 PHYs, hardware-assisted security as well as multi-gigabit interfaces.

Optimized for integration with NXP’s S32G vehicle network processor, the SJA1110 switch is also part of an overall networking solution which includes the VR5510 power management integrated circuit. [Read more…] about NXP launches new ‘multi-gigabit’ automotive Ethernet switch for time-sensitive networking

Omron unveils ‘industry’s fastest’ 3D vision sensing technology for robot hands

by

Omron has introduced what it claims is the “industry’s fastest” 3D vision sensing technology for robot hands.

The compact vision sensors can three-dimensionally recognize the position and orientation of target objects.

Incorporating this technology with robots will enable fast and accurate assembly of bulk parts by automating the conventional human-intensive process. [Read more…] about Omron unveils ‘industry’s fastest’ 3D vision sensing technology for robot hands

New Scale Robotics launches its latest gripper for Universal Robots e-Series

by

New Scale Robotics has launched its newest gripper for the Universal Robots e-Series collaborative robot.

The company says its new technology “harnesses UR’s new high-speed communications interface to increase measurement precision and control multiple grippers on one robot”.

New Scale Robotics describes the new peripheral as “a precision electric parallel gripper for Universal Robots e Series cobots”. [Read more…] about New Scale Robotics launches its latest gripper for Universal Robots e-Series