Robotics & Automation News

Market trends and business perspectives

easily

Clearpath Robotics launches outdoor autonomy software

by Leave a Comment

Clearpath Robotics, a manufacturer of mobile robotics platforms for research and development, today launched OutdoorNav – an autonomous navigation software platform designed for vehicle developers, OEMs, and robotics researchers.

Compatible with Clearpath’s outdoor mobile platforms as well as third-party industrial vehicles, OutdoorNav provides reliable GPS-based navigation for faster, more efficient autonomous vehicle development.

Bryan Webb, president of Clearpath Robotics, says: “Robotics product development can often be a difficult, sometimes harrowing experience. [Read more…] about Clearpath Robotics launches outdoor autonomy software

Alstef unveils robot for baggage handling at airports

by Leave a Comment

Alstef has unveiled a mobile robot for handling baggage at airports. The new machine – the BAGXone – was launched by Nicolas Breton, Alstef Group’s CEO, at a recent industry event.

BAGXone is described as a high-speed automated guided vehicle designed to handle individual bags. It can cover short distances, from check-in to screening machines or from the screening machines to an early bag store, reconciliation room, make-up carousel.

It can also cover long distances – for example, link between two terminals. It is also “easily adaptable” to suit scalability and redundancy requirements. If there are increased capacity requirements or expansion of the baggage sorting system, new AGVs can be added to extend the fleet. [Read more…] about Alstef unveils robot for baggage handling at airports

Comau introduces new robot for ‘sensitive’ environments

by Leave a Comment

Comau has introduced its new Racer-5 Sensitive Environments (Racer-5 SE), a high-speed industrial robot designed for the special and sensitive settings that characterize the pharmaceutical, health and beauty, food and beverage and electronics industries.

Featuring a protective water, heat and grease-resistant coating, the ruggedized 6-axis articulated robot fully responds to the demand for IP67 certification, high-grade ISO 5 Cleanroom classification (ISO 14644-1), protection from chemical agents and the need to reduce the risk of contamination. It also has NSF H1 food grade lubrication.

Further benefits of the dedicated robot include reduced operator risk when working with potentially harmful chemicals and substances, as well as increased productivity, traceability, and quality. [Read more…] about Comau introduces new robot for ‘sensitive’ environments

Stratom launches platform to enable faster development of autonomous systems in complex terrain environments

by Leave a Comment

Stratom, a developer of autonomous ground vehicles and robotic systems for logistics and operational applications, has launched its Summit Off-Road Autonomy Platform, which it describes as “a highly configurable modular software system that can be easily customized for various unmanned vehicles, applications, operations and environmental conditions”.

Leveraging Stratom’s proven off-road and complex terrain capabilities, Summit delivers flexible, tailored and cost-saving autonomy solutions for a variety of industries and applications in challenging or dangerous environments. [Read more…] about Stratom launches platform to enable faster development of autonomous systems in complex terrain environments

Does technology improve the cannabis industry?

by Leave a Comment

As many states and countries have legalized the use of marijuana especially because of medicinal and recreational purposes, so the cannabis industry has improved a lot in the last few years.

This is all thanks to technology which has helped a lot in making such breakthroughs.

Technology has helped a lot in improving the cannabis industry. Nowadays, weed is found in different ways. For instance, in the form of oils, capsules, sprays, and creams, and so on. [Read more…] about Does technology improve the cannabis industry?

Toyota Research Institute reaches ‘new technical milestones in robotics’

by Leave a Comment

Toyota Research Institute (TRI) says it has reached “new technical milestones in robotics”. The company has unveiled new robotics capabilities aimed at solving complex tasks in home environments.

Specifically, TRI roboticists were able to train robots to understand and operate in complicated situations that confuse most other robots, including recognizing and responding to transparent and reflective surfaces in a variety of circumstances.

As TRI demonstrates in a new video (see below), this robust system allows robots to make generalizations in a range of scenarios, including in different homes. [Read more…] about Toyota Research Institute reaches ‘new technical milestones in robotics’

Why Custom SaaS Solutions Are Better Than On-Premise Solutions

by Leave a Comment

Gone are the days when you need to use downloadable software! 

This is the era of cloud technology which enables developers to develop customized business solutions that users can easily access without any downloads.

With SaaS solutions, you can easily develop a customized app for your business. As it is a Software as a Service, you don’t need to download the software on your device. [Read more…] about Why Custom SaaS Solutions Are Better Than On-Premise Solutions

New Scale Robotics gains Certified System Integrator status from Universal Robots

by Leave a Comment

New Scale Robotics is now a Certified System Integrator (CSI) for Universal Robots. This enables New Scale to sell and deploy UR collaborative robots with its Q-Span Workstation Kits for small part measurement.

The Q-Span Workstation Kit is a UR+ Certified Application Kit, designed and manufactured by New Scale Robotics to work with the Universal Robots e-Series collaborative robots (cobots).

It automates the tedious process of manually measuring small parts for quality control and recording the data for statistical analysis. [Read more…] about New Scale Robotics gains Certified System Integrator status from Universal Robots

Fuzzy Logic Robotics launches platform that enables users to go from CAD to control with one software

by Leave a Comment

Startup company Fuzzy Logic Robotics has launched a new, “easy-to-use and universal” software platform which it says “reduces robotics programming costs by 10”.

The first release of Fuzzy Studio, during Hannover Messe Industry 2021, is described as a “game changer” for unlocking flexible robotic production.

Fuzzy Logic Robotics highlights some of the features available in Fuzzy Studio as follows:

  • Drag and drop CAD parts into the 3D digital twin, automatically generate complex trajectories and deploy to the production robot in one click – all with one universal software platform.
  • From offline simulation to real-time control, Fuzzy Studio removes the gap between simulation and reality to reduce downtime and streamline the robotics workflow.
  • Designed from the ground up to drastically reduce the need of robotics expertise thanks to no-code real-time digital twin technology.
  • With two clicks, swap between any make and model of robot to find the right one for the application – no need to switch softwares and redo time-intensive design work.
  • Handles even the most complex robotic applications and accessible to any size of company.

[Read more…] about Fuzzy Logic Robotics launches platform that enables users to go from CAD to control with one software

Okuma makes ‘conversational programming’ standard on its CNC machines

by Leave a Comment

Okuma, one of the world’s largest manufacturers of industrial equipment, has introduced “conversational programming” as standard on its CNC machines.

Okuma says its Advanced One Touch (AOT) conversational programming software enables shops to “easily create programs without the need for highly-trained programmers, achieve faster setup times, and increase machine productivity”.

Okuma America says that select machines from Okuma’s core product line now come equipped with the Advanced One Touch-Interactive Graphics Function (AOT-IGF), the conversational programming software designed for Okuma’s lathes, machining centers and multitasking machines. [Read more…] about Okuma makes ‘conversational programming’ standard on its CNC machines