Robotics & Automation News

Where Innovation Meets Imagination

David Edwards

KeepTruckin partners with Ambarella to develop next-generation AI device for ADAS

by

KeepTruckin, a provider of fleet management technology, has selected Ambarella’s CV22 CVflow edge AI vision system on chip for its new AI Dashcam.

This latest AI Dashcam, also announced today, uses a single CV22 SoC to simultaneously provide AI and image processing for its dual-camera system, which integrates one camera for the front advanced driver assistance system with incident recording, and a second RGB-IR camera for the driver-monitoring system with driver recording.

Additionally, with Ambarella’s industry-leading edge AI processing performance-per-watt, the CV22 enables the AI Dashcam to run KeepTruckin’s proprietary sophisticated and accurate AI algorithms for real-time high-risk behavior detection and active warnings directly on the small form factor device, with minimal heat dissipation. [Read more…] about KeepTruckin partners with Ambarella to develop next-generation AI device for ADAS

US DoD selects Stratom to migrate robotic systems from ROS-1 to ROS-2

by

Stratom, a developer of autonomous ground vehicles and robotic systems for logistics and operational applications, has been selected as part of an exclusive team to deliver the US Department of Defense’s Stage II of the Modular Autonomy and Robotic Software program, which involves the collaborative migration of Robotic Technology Kernel software modules from the first version of the Robot Operating System to ROS 2. 

For nearly a decade, the US government has been developing ROS-M (Robotic Operating System-Military), an ecosystem of software architectures, reusable components and supporting infrastructure to enable rapid development and fielding of robotic and autonomous systems.

Built on ROS 1, ROS-M enables the DoD to benefit from open-source development practices while maintaining tight control over the community-developed code. However, ROS 1’s current revision, Noetic, is set to be the last version, with support ending in 2025. [Read more…] about US DoD selects Stratom to migrate robotic systems from ROS-1 to ROS-2

Monogram Orthopedics attracts 5,000 investors on way to raising $30 million

by

Monogram Orthopedics, the startup advancing the future of joint replacement surgery, has attracted 5,000 Series B investors – and almost $1 million – on crowdfunding platform StartEngine.

Aiming to personalize the $19.6 billion joint replacement market through artificial intelligence, robotics, and 3D printing, Monogram Orthopedics is targeting a $34 million raise to scale and bring their technology to market.

The company expects to kick off its unmatched personalized approach with its first Total Knee Arthroplasty implant FDA submission planned for later this year. [Read more…] about Monogram Orthopedics attracts 5,000 investors on way to raising $30 million

Abu Dhabi starts work on building region’s first-ever quantum computer

by

Abu Dhabi’s Technology Innovation Institute, a pioneering global research and development centre that focuses on applied research, today unboxed the cryostat – the initial frame of its quantum computer that is being assembled in the UAE capital.

TII’s Quantum Research Centre (QRC) is spearheading the landmark advanced technology project that aims to give the world a quantum advantage through developing a supercomputer with exponential computational capabilities.

Two helium dilution refrigerators arrived from Finland earlier this week in massive wooden crates, an essential component that uses helium isotopes to cool the quantum chips or the brain of the computer and maintain the quantum information. [Read more…] about Abu Dhabi starts work on building region’s first-ever quantum computer

Sarcos Robotics signs up Pine Environmental as distribution partner

by

Sarcos Robotics, a developer of exoskeletons and other robotic systems, has signed up Pine Environmental Services as an official distributor.

Pine Environmental is a professional services company providing equipment for environmental monitoring, nondestructive testing, visual inspection, and continuous emissions monitoring.

The agreement will see Pine Environmental become an official distributor of the award-winning Guardian S remote visual inspection and surveillance robot. [Read more…] about Sarcos Robotics signs up Pine Environmental as distribution partner

Timken acquires automation solutions manufacturer Intelligent Machine Solutions

by

The Timken Company, a maker of engineered bearings and power transmission products, has acquired Intelligent Machine Solutions, a builder of industrial robotics and automation solutions.

The addition of iMS expands and complements Timken’s Rollon linear motion product range with larger and heavy-duty applications, such as seventh-axis robotic transfer units (RTUs) and gantry systems.

iMS, which was founded in 2008, is based in Norton Shores, Michigan, in the United States. The company, which has approximately 20 employees, designs and manufactures floor-mounted, overhead, rotary and extreme seventh-axis RTUs and gantry systems used by manufacturers across industries to automate certain production processes. [Read more…] about Timken acquires automation solutions manufacturer Intelligent Machine Solutions

GE Appliances and Google partner to build ‘next-generation smart home appliances’

by

GE Appliances, a Haier company, and Google Cloud have agreed a multi-year partnership to build innovative technologies to elevate the consumer experience in the kitchen and in homes.

As the company continues to reinvent itself and the appliance business, GEA turned to Google Cloud for its world-class expertise in data, analytics, artificial intelligence, and machine learning to accelerate this evolution – and will integrate these capabilities into its entire appliance development process, from ideation to the production line.

The two companies will work together to develop the next generation of smart appliances with Google Cloud Vision AI. [Read more…] about GE Appliances and Google partner to build ‘next-generation smart home appliances’

Epson signs Advanced Industrial Products as distributor in Kentucky and West Virginia

by

Epson Robots has signed Advanced Industrial Products, a factory automation and robotics supplier, as an official distributor of Epson Robots automation solutions.

As manufacturers look to automate small, intricate processes as well as pick-and-place and assembly applications, this new partnership makes automation attainable, simple and affordable to AIP customers in the states of Kentucky and West Virginia.

Epson’s cost-efficient, easy-to-use solutions combined with AIP’s highly technical sales staff and engineers will help open the doors to build new relationships in automotive, food, beverage, and medical markets. [Read more…] about Epson signs Advanced Industrial Products as distributor in Kentucky and West Virginia

Pickit unveils its first gripper with integrated vision and software aimed at forging and automotive sectors

by

Robot vision specialist Pickit has unveiled its first gripper. Aimed at the forging and automotive sectors, the end-of-arm-tool has integrated vision and software.

“The bin picking revolution is happening now,” says Pickit. “With matured 3D vision and software, the implementation risks for bin picking revolve around the gripper design. We have integrated gripper, vision, and software to achieve unprecedented reliability. Here’s our new Billet Picker for forging and automotive applications.”

The company’s new product is called the “Billet Picker”, and is a combination of Pickit EOAT + Pickit 3D vision + Pickit software. [Read more…] about Pickit unveils its first gripper with integrated vision and software aimed at forging and automotive sectors

Robotic 3D printed gradient furniture collection by Philipp Aduatz

by

Incremental3d has teamed up with designer Philipp Aduatz to create a range of furniture made from concrete built by a robotic system.

The 3D printed gradient furniture collection is Philipp Aduatz’s latest project in the field of 3D concrete printing in collaboration with the Austrian manufacturer incremental3d.

3D concrete printing is a new and innovative fabrication technology that allows to print very large and complex structures in construction and design in a very short time period. [Read more…] about Robotic 3D printed gradient furniture collection by Philipp Aduatz