Robotics & Automation News

Where Innovation Meets Imagination

development

China Robot Industry Alliance selects HRG’s disinfection robot

by

The China Robot Industry Alliance, an industry association, has selected HRG’s disinfection robot as a “special case” in its 2020 White Paper on the Development of China’s Robotics Industry.

The recently released 2020 White Paper on the Development of China’s Robotics Industry, compiled by CRIA, has selected HRG anti-pandemic disinfection robot as “a typical case in its special topic on pandemic prevention robots”.

HRG anti-pandemic disinfection robot was independently developed by the Emergency Equipment Research Institute of HRG Hefei Institute. [Read more…] about China Robot Industry Alliance selects HRG’s disinfection robot

How modern robots are developed: ‘Human cyborgs will become commonplace’

by

Today, neuroscience and robotics are developing hand in hand. Mikhail Lebedev, academic supervisor at HSE University’s Centre for Bioelectric Interfaces, spoke about how studying the brain inspires the development of robots.

Robots are interesting to neuroscience and neuroscience is interesting to robots – this is what the article “Neuroengineering challenges of fusing robotics and neuroscience” was about in the journal Science Robotics.

Such collaborative development contributes to progress in both fields, bringing us closer to developing more advanced android robots and a deeper understanding of the structure of the human brain. And, to some extent, to combining biological organisms with machines, to create cybernetic organisms (cyborgs). [Read more…] about How modern robots are developed: ‘Human cyborgs will become commonplace’

What Happens When Cybercriminals Target Industrial Robots?

by

Historically, robots were just dumb pieces of programmable machinery that did the same task over and over again. They had virtually no ability to sense their environment. And they certainly couldn’t make decisions for themselves.

With the advent of machine learning and smart systems, that’s all changing. Now designers are imbuing their mechanical appendages with all manner of intelligence. And it’s only getting better.

For economists, these trends are extremely exciting. We could be looking at a future where robots do the vast majority of manual jobs, freeing up labour for other tasks, boosting productivity like nothing else in human history. [Read more…] about What Happens When Cybercriminals Target Industrial Robots?

Getting Projects off the Ground with Outsourcing

by

What works for the largest businesses doesn’t necessarily work for the smallest ones.

Startups in particular often lack the resources to pursue ideas for completely new projects and services because they may not have accumulated funds, or an experienced team, in order to begin development on the scope they desire.

Companies that want to increase their project output tend to benefit a lot from outsourcing development as a way to get around this. [Read more…] about Getting Projects off the Ground with Outsourcing

Lidar sensor makers choose Nvidia Drive for development

by

Baraja, Hesai, Innoviz, Magna and Ouster join Nvidia Drive developer ecosystem

When it comes to autonomous vehicle sensor innovation, it’s best to keep an open mind – and an open development platform, according to chipmaker Nvidia. 

That’s why Nvidia Drive is the chosen platform on which the majority of these sensors run, says the company.

In addition to camera sensors, Nvidia has long recognized that lidar is a crucial component to an autonomous vehicle’s perception stack. By emitting invisible lasers at incredibly fast speeds, lidar sensors can paint a detailed 3D picture from the signals that bounce back instantaneously. [Read more…] about Lidar sensor makers choose Nvidia Drive for development

South Korea looks to strengthen position in global autonomous vehicles market with billion-dollar investment

by

South Korea is looking to strengthen its position in the global autonomous vehicles market with an investment of 1.1 trillion South Korean won, which equates to about $1 billion.

The investment calls for the development of “level 4” autonomous cars, according to the Ministry of Science and ICT, according to a report on the Korean Times website.

Level 4 autonomy – as defined by the SAE – means that a car is capable of driving itself but is designed to be ultimately controlled by a human driver. [Read more…] about South Korea looks to strengthen position in global autonomous vehicles market with billion-dollar investment

General Motors opens new 3D printing facility

by

General Motors has opened a 15,000-square-foot “Additive Industrialization Center”, a facility exclusively dedicated to productionizing 3D printing technology in the automotive industry.

GM says the AIC is the “capstone” of its expertise and increased investment in 3D printing over the past several years.

Audley Brown, GM director of additive design and materials engineering, says: “The core component of GM’s transformation is becoming a more agile, innovative company, and 3D printing will play a critical role in that mission. [Read more…] about General Motors opens new 3D printing facility

Seoul Robotics launches ‘breakthrough’ perception software platform

by

​Seoul Robotics​, a 3D computer vision company using AI and machine learning to power the future of mobility, has made its formal debut in the US market with the launch of its first commercial product, Discovery.

The company, which has been developing sensor agnostic perception software for 3D sensors for the past three years, provides large-scale companies, institutions, and governments with access to LiDAR solutions to support a range of functions and increase efficiency and safety.

The LiDAR market is currently on track to reach more than $3 billion by 2025, fueled over the last decade by companies focused on the development of autonomous vehicles. [Read more…] about Seoul Robotics launches ‘breakthrough’ perception software platform

Wikifactory raises $4.5 million to expand its new design collaboration software

by

Wikifactory, an online collaboration platform for physical product design and development, has completed a “total upgrade” that it says will enable users the ability to make anything with nothing but a laptop and an internet connection.

Wikifactory says its new Collaborative CAD Tool with in-built chat will “transform the way products are made”, enabling designers, engineers, manufacturers and enterprise to collaborate remotely on virtually any CAD model, from concept through to finished prototype.

The new Collaborative CAD Tool allows product developers of all skill levels in virtually any industry to explore, review and discuss 3D models in over 30 file formats in real-time. [Read more…] about Wikifactory raises $4.5 million to expand its new design collaboration software