systémes

BA Systèmes to upgrade its AGV implementation for Hesbaye Frost

June 29, 2020 by David Edwards Leave a Comment

BA Systèmes is to upgrade its implementation of automated guided vehicles for its long-term client Hesbaye Frost.

Hesbaye Frost renews its confidence in BA Systèmes to replace its entire AGV installation in operation since 2000 in its site in Geer, in Belgium.

As part of the project, BA Systèmes will proceed to the equipment replacement and to the supervision software environment upgrading to achieve higher performance on this site operating in a deep-frozen environment. [Read more…] about BA Systèmes to upgrade its AGV implementation for Hesbaye Frost

BA Systemes unveils new ‘compact and robust’ AGV

November 14, 2019 by Sam Francis Leave a Comment

Logistics technology company BA Systemes has unveiled what it describes as a “compact and robust” automated guided vehicle for warehouse operation, mainly to handle pallets. (See video below.)

The company says its GF 10.1 AGV has been designed to be “modular and easily adaptable” to the various specificities of its customers.

BA Systemes says the new AGV can handle all types of pallets, from traditional Euro pallets to GMA pallets with perimeter base. [Read more…] about BA Systemes unveils new ‘compact and robust’ AGV

Boom Supersonic and Dassault Systèmes partner to advance development of new supersonic plane

May 24, 2019 by David Edwards

Boom Supersonic is implementing Dassault Systèmes’ 3DExperience platform to accelerate the design and development of Overture, its Mach-2.2 commercial airliner, with an aim to make supersonic travel mainstream and affordable.

Boom Supersonic is using Dassault Systèmes’ “Reinvent the Sky” industry solution experience based on the 3DExperience platform to support product development from concept through manufacturing and certification.

By using this solution, Dassault Systèmes says Boom Supersonic can cut development time of its first prototype in half and improve product quality by reducing program complexity, inefficiency, costs and resources, lowering the barriers to market entry. [Read more…] about Boom Supersonic and Dassault Systèmes partner to advance development of new supersonic plane

Boeing and Dassault Systèmes extend design and product lifecycle management partnership

July 25, 2017 by Sam Francis

The world’s largest aerospace company, Boeing, has decided to extend its use of Dassault Systèmes applications to include more software from the 3DExperience platform for its design, manufacturing operations management, and product lifecycle management.

Boeing will expand its deployment of Dassault Systèmes’ products across its commercial aviation, space and defense programs.

This decision follows a competitive process that included the rigorous analysis of technical and functional capabilities, cost and business benefits across the value chain. [Read more…] about Boeing and Dassault Systèmes extend design and product lifecycle management partnership

Airbus chooses Stratasys system to 3D print components for new aircraft

July 24, 2017 by Sam Francis

Stratasys has been chosen by Airbus to supply 3D printing and additive manufacturing systems for the production of components for aerospace company’s new plane.

Airbus has already used the Stratasys FDM 3D Production System to produce 1,000 flight parts for use on its A350 XWB aircraft.

The 3D printed parts use a resin called Ultem 9085, which is certified to an Airbus material specifications to have a high strength to weight ratio and to be resistant to flame, smoke and toxicity – necessary for aircraft interiors. [Read more…] about Airbus chooses Stratasys system to 3D print components for new aircraft

Dassault Systèmes boss talks about generative design and whether humans are necessary

July 14, 2017 by Abdul Montaqim

Nothing is as straightforward as it might first sound. So, for example, one might imagine that, by using generative design software, a designer could set parameters for the computer to produce a structure and then use a 3D printer to output that structure, whether that structure is a single molecule of steel or a larger, more complex structure, like a car body. Basically, you could get the computer to do almost all of the design work.

The technology is available to do those things. And any designer who’s produced countless iterations of one basic design would certainly appreciate such powerful software. But is it really as simple as that? Probably not.

If anyone would know the answer for sure, it would be Stephen Chadwick, managing director of Dassault Systèmes for the north European region, or EuroNorth, and he says it’s possible to remove humans from the design process completely. [Read more…] about Dassault Systèmes boss talks about generative design and whether humans are necessary

Video: Dassault Systèmes to launch integrated new platform for 3D printing

May 13, 2017 by Sam Francis

Dassault Systèmes is planning to launch an integrated 3D printing platform in the next few months, according to a senior executive at the company.

In an interview with RoboticsAndAutomationNews.com, Philippe Bartissol, vice president, industrial equipment industry, Dassault Systèmes, says the the initiative will be announced in the next two months.

The initiative will “address the complete ecosystem of 3D printing”, says Bartissol, adding: “It will not be only one customer using our platform extensively.

“It will be several players from several fields jointly working on one platform, with payment possibilities and delivery possibilities as well.” [Read more…] about Video: Dassault Systèmes to launch integrated new platform for 3D printing

Renishaw and Dassault team up for integrated additive manufacturing

January 24, 2017 by Mark Allinson

Engineering services provider Renishaw is collaborating with Dassault Systèmes, a 3D modelling, simulation and industrial operations software provider, as part of its commitment to provide and enhance software for metal additive manufacturing.

Users of Dassault Systèmes 3DExperience platform applications can now design, optimise, simulate and set up additive manufacturing builds directly for production on Renishaw’s additive manufacturing systems, which build 3D metal parts using laser powder bed fusion technology. [Read more…] about Renishaw and Dassault team up for integrated additive manufacturing

Dassault Systèmes launches solution for architecture, engineering and construction industries

October 17, 2016 by Sam Francis

Cloud collaboration solution from “design to fabrication” aimed at solving problems ahead of construction

Dassault Systèmes, a provider of product lifecycle management solutions among other software, has launched its “design for fabrication industry solution experience” for architecture, engineering and construction.

The company says the software gives architects, engineers, contractors, fabricators and building products manufacturers access to a digital, collaborative environment on the cloud for civil and building projects, from concept through fabrication detail with shop floors that reduces waste and rework.

Each architecture, engineering and construction project brings together new teams of designers, fabricators and contractors who use their own building information modeling solutions. [Read more…] about Dassault Systèmes launches solution for architecture, engineering and construction industries

Dassault Systèmes to acquire CST

July 27, 2016 by Sam Francis

Dassault Systèmes has entered into an agreement to acquire Computer Simulation Technology, a provider of electromagnetic and electronics simulation, for approximately €220 million.

With the acquisition of CST, based near Frankfurt, Germany, Dassault Systèmes will complement its industry solution experiences for realistic multiphysics simulation on the 3DExperience platform with full spectrum electromagnetic simulation.

CST’s Studio Suite software is used by designers and engineers at more than 2,000 leading companies in the high-tech, transportation and mobility, aerospace and defense, and energy industries to evaluate all types of electromagnetic effects during every stage of electronic system design processes. [Read more…] about Dassault Systèmes to acquire CST