Robotics & Automation News

Where Innovation Meets Imagination

machine

The human factor: GE Digital automation boss hints at new directions for Predix

by

Exclusive interview with Matt Wells, of GE Digital. By Abdul Montaqim

GE Digital is a subsidiary of General Electric, the quintessential American multinational corporate conglomerate with operations in more countries than the United Nations. 

But far from being just one of its parent company’s dozen or so subsidiaries, GE Digital is something of a shooting star, outperforming many other subsidiaries to the point where it is informing, if not transforming, the entire culture and ethos of the company.

Nowadays, General Electric likes to be known as a “the world’s digital industrial company”, except they capitalise the words to emphasise the importance of the virtual realm.  [Read more…] about The human factor: GE Digital automation boss hints at new directions for Predix

Aerospace industry places unique demands on holemaking technology

by

Boeing_Factory

Plan ahead to get tooling that can handle today’s new materials, say Nate Craine and Greg Torres, of Allied Machine & Engineering

The aerospace industry is bigger than ever. As more and more people rely on air transport, the Airbus Global Market Forecast predicts the need for 33,000 new passenger and freighter aircraft in the next 20 years.

Between recent space endeavors and increasing air traffic, fabricators are constantly faced with new problems to solve.

In aerospace, the parts needed are often unique or newly designed and the deadlines are tight. With materials constantly changing, fabricators must be able to create new ways of safely and effectively drilling through them in as short a time as possible.  [Read more…] about Aerospace industry places unique demands on holemaking technology

Machine learning helps researchers design less costly optical sensors

by

Finding practical solutions to detect proteins, cancer biomarkers, viruses and other small objects has been a key challenge for researchers worldwide for decades. These solutions hold promise for saving lives through more timely diagnosis and treatment of serious infections and diseases.

Now a UCLA team’s new research shows how such detections might be done for a fraction of the cost by using “smart” mobile devices designed by machine learning.

One method to detect small objects and related biomarkers is called plasmonic sensing, which involves shining light onto metal nanostructures to amplify the local electric field. The interaction between this amplified electric field and the molecule of interest can be measured, revealing important information about molecular concentration and kinetics. [Read more…] about Machine learning helps researchers design less costly optical sensors

Keeping costs down: The lion’s share of IoT communication

by

IoT compatbility for legacy systems

Adrian Swindells, director of industrial computing specialist Distec, explores how businesses can keep the cost of IoT implementation to a minimum

One of the biggest bugbears of plant managers is the cost of upgrading or replacing devices and equipment.

While this has traditionally only occurred due to a breakage, the rise of the internet of things has driven a need for cross-compatible equipment – in most cases calling for the costly replacement of legacy systems to ensure communication.

Whether you think of it as industry 4.0 or the IoT, the concept of machine to machine internetworking is undeniably the most talked about technological development of recent times.

In fact, forecasts have predicted the market for the IoT to be worth $14.4 trillion by 2022.  [Read more…] about Keeping costs down: The lion’s share of IoT communication

Igus augments chainflex servo cable offering for machine tool applications

by

igus chainflex servo cables

Igus has added to its chainflex range with the introduction of chainflex servo cable families developed specifically for machine tool applications.

Machine builders are offered the option of selecting the most cost-effective cable, guaranteed to work reliably based on the required profile of the bend radius, travel distance and speed.

Chainflex cables from the CF27.D series feature a minimum bend radius of only 7.5 times the cable diameter; this makes them particularly well suited for use in tight installation spaces and highly dynamic applications, for example in gantries.  [Read more…] about Igus augments chainflex servo cable offering for machine tool applications

Denso opens automotive research and development lab at Michigan university

by

university-of-michigan

Global auto supplier Denso has opened a new research and development lab at the University of Michigan, in the US. 

Denso, which used to be part of Toyota, says the new research facility will “accelerate development of new auto safety technologies and create new research opportunities for engineering students”.

The company says the Denso R&D Lab gives Denso an opportunity to more closely collaborate with the university and North American automotive manufacturers on key safety technologies like machine learning, advanced driver assistance systems, and automated drive.

As part of the lab, 12 university students have been selected to participate in research projects, which will begin this month and run throughout 2017.  [Read more…] about Denso opens automotive research and development lab at Michigan university

Tiny chip capable of running deep neural networks could accelerate robotics development

by

movidius

One of the challenges in robotics development is the fact that the computer processing required is just massive, often too much for a complex machine to handle onboard without packing very large pieces of hardware. 

One way around it has been to connect the robots up to cloud computing systems which run such things as neural networks and can remotely process data – but this is inefficient and slow.

Even if takes a few seconds to process massive quantities of data, those seconds are just too much time wasted for a machine such, for example, an autonomous car on the move – these things need to be instantaneous.  [Read more…] about Tiny chip capable of running deep neural networks could accelerate robotics development

Industrial Vision Systems relocates to ‘fulfil ambitious expansion plans’

by

ivs harwell relocation

Company is expecting “year on year double digit growth” in machine vision, robotics and artificial intelligence over the next decade

Industrial Vision Systems, a supplier of machine vision solutions to industries including automotive, medical devices, electronics, food and drink, and packaging, has relocated into a new facility – custom designed to its own specification – in order to fulfil its ambitious expansion plans.

Having grown “significantly” over the course of the past 16 years, Industrial Vision Systems has now made the move to its brand new 10,000 sq ft premises at the prestigious Harwell Science and Innovation Campus in Oxfordshire which will allow it to grow further and capitalise on new, emerging markets.

The relocation presents a new phase of business for IVS. The company is fully expecting year on year double digit growth in machine vision and robotics on the manufacturing floor over the next decade. [Read more…] about Industrial Vision Systems relocates to ‘fulfil ambitious expansion plans’

Predictions for the future of manufacturing

by

industrial trends

Martyn Williams, managing director of industrial software expert Copa-Data UK, examines three of the most prominent automation trends of 2017 and discusses how these trends are changing manufacturing operations

As manufacturing facilities incorporate greater levels of automation, the demand for new technologies continues to grow.

Recent years have seen several trends create a shift in the way the industry operates.  [Read more…] about Predictions for the future of manufacturing

Case study: A task for two collaborative robots

by

Vision-guided collaborative robots deliver fast return on investment in production of firehose valves

Task Force Tips, a manufacturer of firefighting equipment, wanted to promote and maximize their personnel tending machining cells into more complex tasks while keeping spindle time up and product quality consistent.

The Indiana-based manufacturer has now installed four collaborative Universal Robots delivering savings resulting in a return on their investment in only 34 days.

CEO of Task Force Tips, Stewart McMillan, still remembers his father looking up at him with pen in hand asking, “Are you sure about this?”, when the family-owned company bought their first CNC machine 40 years ago.
  [Read more…] about Case study: A task for two collaborative robots