Robotics & Automation News

Where Innovation Meets Imagination

Features

Kuka showcases innovative medical project at the 2018 European Robotics Forum

by

Kuka is showcasing an innovative research project from the medical sector at the European Robotics Forum (ERF) in Tampere, Finland, this week.

Together with the University of Bremen and Chemnitz University of Technology, FACT Software and CAT Production, Kuka is presenting an application for the simulation of one of the most challenging steps during an operation: implanting an artificial hip.

Performing the operation in the virtual world with haptic feedback via the Kuka LBR iiwa lightweight robot is an important component in the training of future surgeons as well as in the planning stages prior to an operation.

[Read more…] about Kuka showcases innovative medical project at the 2018 European Robotics Forum

Automatica 2018: Innovative automation solutions in plastics, foodstuffs and packaging

by

Leading automation companies will be at automatica in Munich, Germany, from June 19 to 22, 2018. Visitors from industries such as food and beverages, plastics and packaging will find numerous innovative automation solutions and have the opportunity to exchange ideas with experts.

Companies from the fields of plastics, foodstuffs and packaging are increasingly employing innovative automation to improve their competitive position. Compared to the pioneering automobile industry, however, these three industry sectors have some catching up to do.

The great economic importance of automation technology can be felt on a global level: According to the International Federation of Robotics (IFR), more than 1.7 million new industrial robots will be installed in factories all over the world by the year 2020, which will increase global inventory to more than three million units.

[Read more…] about Automatica 2018: Innovative automation solutions in plastics, foodstuffs and packaging

Bosch analysis: Driver assistance systems continue their strong advance

by

People buying new cars today in Germany and Europe are placing more and more value on having electronic assistants on board, says Bosch, based on analysis carried out on new registration statistics for 2016.

“There is a clear trend: it will soon be just as natural to have cars fitted with driver assistance systems as it is with a radio and ESP,” says Bosch board of management member Dr Dirk Hoheisel.

Parking and lane assist systems, as well as emergency braking systems are becoming increasingly popular, with 62 percent of new passenger cars registered in Germany in 2016 being equipped with some kind of parking assistance system – ranging from parking beepers to automatic parking assistants.

[Read more…] about Bosch analysis: Driver assistance systems continue their strong advance

New research: Industrial robotics market to reach $40 billion by 2020

by

The global Industrial Robotics Industry was estimated at $25.68 billion in 2013 and is expected to reach $40 billion by 2020, according to market research by Million Insights.

The desire to reduce operational costs by many manufacturing companies is expected to drive the global market growth, which can be majorly attributed to the adoption of automation through robotics.

Average labor costs in China have been rising by nearly 10 per cent yearly. The use of robots in industries has helped to reduced workers idle time by 80 per cent and save more than 50 per cent of the production cost, leading to significant cost savings.

[Read more…] about New research: Industrial robotics market to reach $40 billion by 2020

SwissLitho develops more simple technique for nano-lithography

by

N10nm pattern generation using thermal scanning probe lithography enabled by simplified materials and processes, says SwissLitho

Thermal scanning probe lithography (tSPL) has been used to create patterns with sub-20 nm half-pitch resolution.

Pattern generation uses a thermally sensitive resist and spin coatable hard mask materials to transfer the resist patterns.

Spin coatable materials permit users of tSPL to reduce time and cost of the patterning process.  [Read more…] about SwissLitho develops more simple technique for nano-lithography

Digitalisation and the greatest industrial show on Earth

by

Hannover Messe is probably the largest and most important industrial technology show on Earth. 

The venue for the event spans an area the size of a small town and it takes several days to visit all of the most important areas you might be interested in.

Covering an event of that magnitude from a journalistic point of view can be difficult if you’re interested in too many things.  [Read more…] about Digitalisation and the greatest industrial show on Earth

Stäubli to show new mechatronics solutions at Hannover Messe

by

At the world’s largest industrial fair in Hannover, Stäubli will show solutions in three fields: connectors, robotics and textiles.

These will include the ultra-safe TX2 six-axis series for all levels of human-robot collaboration, the HelMo mobile robotic system, innovative tool changing systems for robots in all load classes, reliable and extremely performing connector solutions with rapid coupling cycles and new technologies for the manufacture of technical fabrics made from high-modulus fibers.

Stäubli will also be presenting new solutions for making production processes more efficient, economical and compatible with Industry 4.0. Connectorson show will include a range of quick release couplings.

Stäubli will exhibit at Hall 17, Booth C13.

What difference could the seamless integration of pneumatic systems and process control mean to you?

by

Emerson says its ASCO Numatics 580 CHARMs node enables simple Electronic Marshalling of pneumatic systems.

Pneumatic systems are an essential part of many process plants, in industries such as chemical, life science and food & beverage, particularly those where ancillary machines are used.

Although an essential part of the process, these machines are often stand-alone and are not connected back to the process control architecture.  [Read more…] about What difference could the seamless integration of pneumatic systems and process control mean to you?

Green buildings provide $6 billion in benefits to health and climate, says Harvard study

by

Environmentally-firendly buildings provide $6 billion in benefits to health and climate, says a new Harvard study supported by United Technologies.

These previously undocumented benefits are in addition to $7.5 billion in energy savings, for a combined $13 billion in total benefits.

The public health benefits include fewer hospitalizations and reduced climate impacts.  [Read more…] about Green buildings provide $6 billion in benefits to health and climate, says Harvard study

Volvo Trucks shows off its ‘pioneering automation work’

by

Volvo Trucks says its “pioneering automation work” focuses on safety and the ongoing importance of professional drivers

The steady advancement of vehicle automation technologies creates exciting possibilities for the future of the transport industry and society as a whole.

Volvo Trucks has been at the forefront of this global evolution for well over two decades and believes automation will increasingly transform the way we live and work in the coming years.

The technological possibilities of tomorrow have intrigued and inspired us for generations. Today, technology moves faster than ever. Robots are taking over service industries.  [Read more…] about Volvo Trucks shows off its ‘pioneering automation work’

Please switch off your ad blocker.

Our website relies on ads to provide free content and sustain our operations. By turning off your ad blocker, you help support us and ensure we can continue offering valuable content without any cost to you.

We truly appreciate your understanding and support. Thank you for considering disabling your ad blocker for this website