Robotics & Automation News

Where Innovation Meets Imagination

David Edwards

ABB claims world record in energy efficiency for its synchronous motor

by

 

abb AMS 1400 Motor

ABB says it has set a new world record in energy efficiency with its synchronous motor – and says the technology could save companies half a million dollars over 20 years.

The company says it achieved “almost 100 per cent energy efficiency” with the motor.

Tests carried out on a 44 megawatt 6-pole synchronous ABB motor shortly before delivery showed an efficiency 0.25 percent greater than the 98.8 percent stipulated in the contract, resulting in the world record for electric motor efficiency.  [Read more…] about ABB claims world record in energy efficiency for its synchronous motor

ThyssenKrupp claims ‘breakthrough’ in digital transformation and connecting machinery ​

by

ThyssenKrupp says it has achieved a breakthrough in the area of digital transformation and connecting machinery ​in industry.

ThyssenKrupp says it has reached a “milestone” for the digital transformation of industry and connecting the machinery of its materials services division through a new digital platform.

The company’s new internet of things platform is call Toii, or toii, as the company prefers to write it.  [Read more…] about ThyssenKrupp claims ‘breakthrough’ in digital transformation and connecting machinery ​

PLC vs PAC: Similar but not the same

by

By Zach Arnold, founder, Arnold Machine

Programmable logic controllers, or PLCs, and programmable automation controllers, or PACs, are similar as they both perform the same essential functions. But with modern technology, their differences are becoming more blurred. 

The most notable difference between PLCs and PACs is their programming interface. PACs are more intricate, using C or C++. PLCs on the other hand, are programmed using ladder logic.

These programming differences create distinctions in the architecture and capability between the two computers.  [Read more…] about PLC vs PAC: Similar but not the same

NSK miniature linear guides bring ‘higher dynamics’ to pick-and-place machines

by

 

NSK says its linear guides bring “higher dynamics” to pick-and-place machines.

As machines for the semiconductor industry operate with cycle times of one second or less, pick-and-place units must offer very high dynamic performance.

A case in point can be seen at a manufacturer of chip-mounting systems, where NSK recommended a combination of its ball screw and miniature linear guide technologies to replace the existing linear motor and significantly increase dynamic capability.  [Read more…] about NSK miniature linear guides bring ‘higher dynamics’ to pick-and-place machines

Autodesk launches generative design tool for Netfabb 3D design software

by

Autodesk has released a beta version of a generative design tool for its Netfabb additive manufacturing software, with a view to a full launch early next year. 

Generative design is a term to describe an automation functionality within 3D design software which enables users to set parameters such as materials and physics and allow the software itself to conjure up a design.

Some might describe it as automated or autonomous design – or even sorcery and magic – as it uses artificial intelligence and machine learning to generate structures within the software.  [Read more…] about Autodesk launches generative design tool for Netfabb 3D design software

Continental demonstrates ‘Cruising Chauffeur’, its vision of autonomous driving

by

continental cruising chauffeur 2
Continental’s Cruising Chauffeur autonomous vehicle

Continental has showcased its “Cruising Chauffeur”, an self-driving car platform which provides an insight into the company’s vision of the future of what it calls “highly automated driving” on highways.

Highly automated driving on highways is no longer just a dream, says the company, but now a reality.

Continental started testing systems for automated driving on public roads back in 2012 in Nevada, and was the first automotive supplier to receive the state’s license to test automated vehicles.  [Read more…] about Continental demonstrates ‘Cruising Chauffeur’, its vision of autonomous driving

TUV Rheinland outlines cyber security threats to industrial robotics and automation systems

by

TUV Rheinland was invited to attend Shanghai International Industrial Automation & Robot Exhibition 2017 earlier this month, and held thematic lectures on the “New Engine of Smart Society – Robots and Inspection & Certification Services for Robot Systems” during the exhibition.

Shu Xu, unit general manager of commercial products of TUV Rheinland Greater China, officially released in the lecture a white paper on industrial robotics and cyber security, drawing considerable interest of many exhibitors, media and professionals in the world of robotics.

The white paper provides a detailed picture of various cyber security risks faced by industrial robots, as well as latest developments on technological trends, standards and product testing in the cyber security industry.  [Read more…] about TUV Rheinland outlines cyber security threats to industrial robotics and automation systems

Neousys launches ARM-based IoT gateway

by

neousys igt-20

Neousys Technology has launched an industrial grade ARM-based gateway, which it calls IGT-20.

The company says unlike System on Module (SoM) that’s commonly provided as a barebone component, IGT-20 is based on AM3352 from Texas Instrument’s Sitara AM335x family and will be shipped as a ready system pre-installed with Debian.

The industrial nature of IGT-20 means it is in compliance with common industrial certifications such as CE/FCC, shock and vibration.  [Read more…] about Neousys launches ARM-based IoT gateway

Kollmorgen and VH Vertical Packaging realise new potential with a separate labeler

by

The art of reduction: the packaging machines from VH Vertical Packaging have a simple structure

By Jens Depping

A Dutch packaging machinery manufacturer has now developed a labeller as part of a retrofit with servo-drive technology based on 48 volts.

This is designed as an optional module for the company’s own vertical packaging machines on the one hand and as a functional enhancement for retrofitting older machines of well-known producers on the other.

The combination of the new 48 volt DC Servo Motor low voltage from Kollmorgen and a motion control solution from SigmaTek makes it possible for the labeling module to be integrated easily into new machines or for existing machinery to be retrofitted.  [Read more…] about Kollmorgen and VH Vertical Packaging realise new potential with a separate labeler

Fujitsu extends product portfolio with connectors from Neltron

by

fujitsu connectors

Fujitsu Electronics Europe is extending its line card portfolio to include products from Neltron Industrial.

The Taiwan-based company manufactures ROHS compliant connectors of various types. With this partnership, FEEU is seeking to widen the range of its offerings and to create new synergies between them, strengthening its role as a Value Added Distribution Partner for the EMEA market.

Neltron offers a broad range of connector types, including board to board, wire to board, wire to wire, FPC/FCC, IDC connectors, shrouded header, USB connectors and jumpers.  [Read more…] about Fujitsu extends product portfolio with connectors from Neltron