Robotics & Automation News

Where Innovation Meets Imagination

motor

Festo builds ‘world’s first’ superconductive motor

by

Festo has built a compact, superconductive claw pole motor with solid-body cooling, called SupraMotor, which it claims is a world first.

It has a highly compact design, a high holding torque and a durable electrical direct cooling system. For a number of years, the company has also been investigating superconductive drive units in addition to automation concepts with superconductor technology.

Along with the movement concepts with SupraMotion that are being developed for industrial application, Festo is also investigating technologies for superconductive direct drive units.

[Read more…] about Festo builds ‘world’s first’ superconductive motor

Baumüller prepares to showcase new solutions at Drinktec event

by

Baumüller will introduce what it describes as “complete solution packages and industry-specific components” at Drinktec 2017, the drinks packaging industry event. 

From September 11-15, 2017, Baumüller will participate in drinktec 2017, the world’s leading trade fair for the beverage and liquid food industry in Munich.

In hall B3 at stand 321, the Nuremberg-based drive and automatization specialist will present its specific industry solutions for the beverage industry – from a drive with an aseptic surface for transport tasks in the food sector to compact local drive technology for minimum wiring effort.  [Read more…] about Baumüller prepares to showcase new solutions at Drinktec event

Yaskawa launches direct drive servo motor for ‘backlash-free’ automation applications

by

yaskawa sgm7f servo motor

Yaskawa has introduced a direct drive servo motor that the company says packs a new level of performance into a more compact size than anything offered before. 

The new Yaskawa SGM7F line of direct drive servo motors delivers from 4 to 35 Nm of torque in a device as small as 2.1” high and 5.3” in diameter (53x135mm).

This size advantage makes it possible to apply the mechanical benefits of a direct coupling between a servo motor and a load in tighter spaces than ever before.  [Read more…] about Yaskawa launches direct drive servo motor for ‘backlash-free’ automation applications

ABB claims world record in energy efficiency for its synchronous motor

by

 

abb AMS 1400 Motor

ABB says it has set a new world record in energy efficiency with its synchronous motor – and says the technology could save companies half a million dollars over 20 years.

The company says it achieved “almost 100 per cent energy efficiency” with the motor.

Tests carried out on a 44 megawatt 6-pole synchronous ABB motor shortly before delivery showed an efficiency 0.25 percent greater than the 98.8 percent stipulated in the contract, resulting in the world record for electric motor efficiency.  [Read more…] about ABB claims world record in energy efficiency for its synchronous motor

NSK miniature linear guides bring ‘higher dynamics’ to pick-and-place machines

by

 

NSK says its linear guides bring “higher dynamics” to pick-and-place machines.

As machines for the semiconductor industry operate with cycle times of one second or less, pick-and-place units must offer very high dynamic performance.

A case in point can be seen at a manufacturer of chip-mounting systems, where NSK recommended a combination of its ball screw and miniature linear guide technologies to replace the existing linear motor and significantly increase dynamic capability.  [Read more…] about NSK miniature linear guides bring ‘higher dynamics’ to pick-and-place machines

The advantages of automation in medical diagnostics

by

ats automation medical diagnostics

Technology in the fields of life sciences and medicine is constantly evolving. New manufacturing techniques have made it possible to make more effective therapies, and advances in research have led to more cost-effective solutions to conditions that were once considered too expensive to treat.

One of the most interesting aspects of the evolution of medical technology is the constantly increasing involvement of automation in various medical operations, particularly in diagnostics.

Back then, essential diagnostic procedures relied on manual procedures. While conventional methods were successful to a certain degree, they are hampered by certain limitations.

For instance, manual testing of specimens is slow and prone to mistakes caused by poor human judgment. Automation helps get rid of these limitations to achieve more accurate results in less time.  [Read more…] about The advantages of automation in medical diagnostics

Yaskawa introduces gear motor capabilities for its full Sigma-7 servo line

by

The Drives & Motion Division of Yaskawa America has released what it says is “a full line of gear motors” based on its Sigma-7 servo motors.

The new line brings “precise Yaskawa servo motion to a wider variety of automation applications than ever before, especially to uses which require high torque at low
output speeds”, says the company.

A new set of gearheads have been designed to pair precisely with every servo motor in the full Sigma-7 range, creating complete gear motor solutions rated from a low of 50W to as high as 7.5 kW.  [Read more…] about Yaskawa introduces gear motor capabilities for its full Sigma-7 servo line

Exclusive interviews: Genesis Robotics bosses claim their LiveDrive could ‘change everything’

by

A company called Genesis Robotics is claiming that its new innovation could change the world of robotics, as well as the whole area of motion control in general. 

The company’s LiveDrive is a component which could replace traditional gears in everything from industrial robots to cars and even bicycles.

In an interview with RoboticsAndAutomationNews.com, Genesis Robotics’ president, Michael Gibney, and James Klassen, CTO, both of whom we met at Hannover Messe, provide some background about how the company was formed as well as some insight into the new technology.  [Read more…] about Exclusive interviews: Genesis Robotics bosses claim their LiveDrive could ‘change everything’

Kollmorgen expands its AKM servo motor series

by

Kollmorgen Motor AKM1

Kollmorgen says its new servo motor has energy efficiency, durability, power density, overload capability, and – crucially – is extra low voltage.

The new AKM DC servo motor low voltage with its 48-volt design was originally intended as a customer-specific solution for special areas of use.

Kollmorgen, a specialist in servo-drive technology and motion control will now offer this as a standard add-on to the AKM series, and thus as a new series product.  [Read more…] about Kollmorgen expands its AKM servo motor series

This is the biggest infographic in the world ever

by

infographic – Where-next-for-car-technology

By Neil Tohill, director of Southside Motor Factors

This epic infographic outlines the extraordinary technological innovations that we are currently seeing, or can soon expect to see, on modern vehicles.

The concept of self-driving cars has been mooted for quite some time and has been a feature of sci-fi TV shows or cartoons speculatively casting an eye to the future.

In 2017, autonomous cars have become a distinct possibility, and while a fully autonomous vehicle is still a way off, we can now invest in cars which will let us kick back for most of a journey.

We’re also entering the area of holographic windscreens which can display key data that we would previously have needed to glance down at the dashboard to see.

These advances are remarkable when you think that it wasn’t so long ago since power steering and remote locking were perceived as fantastic innovations.